Abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing, which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. In short, the ceramics which are used to cut, grind and polish other softer materials are known as abrasives.
Cutting tool or cutter is used to cut, shape, and remove material from a workpiece by means of machining tools as well as shear deformation. There are several different types of single edge cutting tools that are made from a variety of hardened metal alloys that are vary in size as well as alloy composition depending on the size and the type of material being turned. These cutting tools are held stationary by what is known as a tool post which is what manipulates the tools to cut the material into the desired shape.
Inspections ensure accuracy and standard. Inspection can be a visual inspection or involve sensing technologies such as ultrasonic testing, accomplished with a direct physical presence or remotely such as a remote visual inspection, and manually or automatically such as an automated optical inspection. Non-contact optical measurement and photogrammetry have become common NDT methods for inspection of manufactured components and design optimization.
Machining is a process in which a material (often metal) is cut to a desired final shape and size by a controlled material-removal process. The processes that have this common theme are collectively called subtractive manufacturing, which utilizes machine tools, in contrast to additive manufacturing (3D printing), which uses controlled addition of material.
Material testing is an interdisciplinary field of materials science that covers the discovery of new materials and characteristic, classify particularly solids. The field is also commonly termed materials science and engineering emphasizing engineering aspects of building useful items, and materials physics, which emphasizes the use of physics to describe material properties.
Metrology is defined by the International Bureau of Weights and Measures (BIPM) as "the science of measurement, embracing both experimental and theoretical determinations at any level of uncertainty in any field of science and technology". It establishes a common understanding of units, crucial to human activity. Metrology is a wide reaching field, but can be summarized through three basic activities: the definition of internationally accepted units of measurement, the realisation of these units of measurement in practice, and the application of chains of traceability (linking measurements to reference standards). These concepts apply in different degrees to metrology's three main fields: scientific metrology; applied, technical or industrial metrology, and legal metrology.
Overall maintenance functions can defined as maintenance, repair and overhaul (MRO), and MRO is also used for maintenance, repair and operations. The technical meaning of maintenance involves functional checks, servicing, repairing or replacing of necessary devices, equipment, machinery, building infrastructure, and supporting utilities in industrial, business, and residential installations. Over time, this has come to include multiple wordings that describe various cost-effective practices to keep equipment operational; these activities occur either before or after a failure.
Sawing are commonly used for cutting hard materials. They are used extensively in forestry, construction, demolition, medicine, and hunting. saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power source. An abrasive saw has a powered circular blade designed to cut through metal or ceramic.
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Teknologi hobbing ini berasal dari revolusi industri di Eropa. Asal muasal teknologi hobbing memang sangat [...]
Standarisasi Limit gauge yang saat ini kita kenal, sebenarnya merupakan produk peralihan dari revolusi industri [...]
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
TOKYO – Nachi-Fujikoshi, produsen bearing otomotif besar Jepang, akan memindahkan pabrik produksi bearing serba guna [...]
Makita dikenal sebagai produsen perkakas kerja teknik maupun pertukangan dengan baterai yang awet dan presisi. [...]
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Selamat datang di Blog Metalextra — tujuan utama kami yang baru untuk pembaruan berita dan cerita terbaru dari dalam Metalextra dan mitra. Kami berharap Blog Metalextra akan memungkinkan kami membawakan Anda lebih banyak cerita dan memberi tahu mereka dengan lebih banyak cara. Terima kasih telah membaca!
Metalextra pertama kali memulai blogging pada tahun 2019 — saat sebelum pandemi menyerang dengan ketidakpastian. Sejak itu Metalextra telah meningkat, dan kami telah menerbitkan ribuan posting di sejumlah besar topik yang terdiri dari pembaruan Produk, Cerita dan kabar berita perusahaan mitra kami, Berita terkait industri presisi dan banyak lagi.
Kami ingin memudahkan Anda menemukan topik mengenai teknik dan konten bermanfaat yang bisa memperluas cakrawala anda dibindang teknik presisi dan pengembangan diri. Blog Metalextra ini dirancang dalam Bahasa Indonesia untuk tumbuh dan berubah seperti yang kami lakukan, sehingga saat kami memperkenalkan produk dan teknologi baru, agar andapun bisa menemukan dan memandu Anda mencari solusi cerdas industri. Dan semuanya hadir dengan gambar, video, dan tayangan slide yang lebih besar dan indah. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Info selengkapnya:
NACHI N Point Taps NPO HSSE LIST6906 merupakan solusi ekonomis mata tapping standard untuk pengerjaan ulir sekrup fastener tembus (Through hole). Cocok untuk ulir logam material besi dan alloy maksimum 35 HRC maupun material plastik dengan ukuran M1 – M36. Gagangnya NACHI N Point Taps NPO HSSE LIST6906 standar, jadi bisa digunakan pada berbagai tipe mesin threading tap berat, fly arm tapping hingga bor portabel tangan.
Mata pisau NACHI N Point Taps NPO HSSE LIST6906 ini terbuat dari material HSS-E dengan kandungan Cobalt 3-5%. mata pisaunya tanpa coating agar memastikan hasil akhir yang halus dan ketahanan tepi terhadap chipping dan bekerja dengan baik pada lubang yang sudah dibor.
Sejak 1928, NACHI FUJIKOSHI menawarkan solusi cutting tool dan solusi manufaktur dari kota Kumano – Wakayama Jepang. NACHI FUJIKOSHI Group juga memiliki unit produksi yang besar di Singapura. Pastikan kehandalan dan keaslian NACHI FUJIKOSHI hanya dengan membelinya di METALEXTRA.com.
Fitur NACHI N Point Taps NPO HSSE LIST6906:
Rentang diameter M1 – M36 sesuai dengan ISO Metrik presisi.
Cocok untuk material Low-Carbon Steel (carbon alloy <0.25%) / Medium carbon steel (carbon 0.25 – 0.45%) / High Carbon Steel (C >0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Quenched dan tempered steel (25 – 35 HRC) / Ductile Cast Iron (FCD) / Copper (Cu) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC)
Tipe gagang lurus atau Straight Shank digunakan untuk aplikas pada mesin drill press, mesin tapping, CNC maupun magnetic drill bor.
Material inti gagang shank terbuat dari material HSS Cobalt polos tanpa coating untuk segala keperluan.
Sudut mata pisau tanpa ulir lurus sehingga konsisten digunakan pada permukaan logam tipe yang sama berulang-ulang.
Harap dicatat:
Gambar hanya untuk tujuan representasi. Produk mungkin berbeda dari yang ditunjukkan di atas. Diskon% dibulatkan ke Bilangan bulat terdekat. Harga bisa berubah sewaktu-waktu seiring dengan perubahan nilai tukar valuta asing dan program promosi. Untuk lebih jelas silahkan hubungi: Sales@Metalextra.com
Dimension Guide ofNACHI N Point Taps NPO HSSE for Through hole, M1 – M36 LIST6906:
NOTES:
M6以下には突出しセンタありとなし（フラットタイプ）の2種類があります。突出しセンタなし（フラットタイプ）の場合は記号のRの前に”Z”が入ります。Taps of M6 or less have 2 types,which are external center and Flat type.
In the case of Flat type (no external center),the code No.has “Z” in front of “R”.
＊：呼び径＜首径です。めねじ加工深さが深い場合、ねじ長以上入れると折損の危険があります。＊：ThreadSize＜Neck diameter(dn)When depth of cutting a female thread is deep, if putting the screw length or more in length,there is a risk of breakage.
Ordering Guide of NACHI N Point Taps NPO HSSE for Through hole, M1 – M10 LIST6906:
| 記号 Code No. |
呼び Thread Size |
等級 TAP Limit |
食付（P） Lc (P) |
全長 L |
ねじ長 ℓ |
溝数 Flutes |
シャンク径 Ds |
首下長さ Ln |
首径 dn |
形式 Type |
|
| 1.4M0.3R | M1.4 × 0.3 | REG | P1 | 5 | 34 | 7.0 | 2 | 3.0 | 11 | 1.5＊ | 1 |
| 1.4M0.3R+1 | REG+1 | P2 | |||||||||
| 1.4M0.3R+2 | REG+2 | P3 | |||||||||
| 1.6M0.35R | M1.6 × 0.35 | REG | P1 | 5 | 36 | 8.0 | 2 | 3.0 | 13 | 1.7＊ | 1 |
| 1.6M0.35R+1 | REG+1 | P2 | |||||||||
| 1.6M0.35R+2 | REG+2 | P3 | |||||||||
| 1.7M0.35R | M1.7 × 0.35 | REG | P1 | 5 | 36 | 8.0 | 2 | 3.0 | 13 | 1.8＊ | 1 |
| 1.7M0.35R+1 | REG+1 | P2 | |||||||||
| 1.7M0.35R+2 | REG+2 | P3 | |||||||||
| 2M0.4R | M2 × 0.4 | REG | P1 | 5 | 40 | 9.0 | 2 | 3.0 | 15 | 2.1＊ | 1 |
| 2M0.4R+1 | REG+1 | P2 | |||||||||
| 2M0.4R+2 | REG+2 | P3 | |||||||||
| 2.2M0.45R | M2.2 × 0.45 | REG | P2 | 5 | 42 | 9.5 | 2 | 3.0 | 15 | 2.3＊ | 1 |
| 2.3M0.4R | M2.3 × 0.4 | REG | P1 | 5 | 42 | 9.5 | 2 | 3.0 | 15 | 2.4＊ | 1 |
| 2.3M0.4R+1 | REG+1 | P2 | |||||||||
| 2.3M0.4R+2 | REG+2 | P3 | |||||||||
| 2.5M0.45R | M2.5 × 0.45 | REG | P2 | 5 | 44 | 10.0 | 2 | 3.0 | 16 | 2.7＊ | 1 |
| 2.5M0.45R+1 | REG+1 | P3 | |||||||||
| 2.5M0.45R+2 | REG+2 | P4 | |||||||||
| 2.6M0.45R | M2.6 × 0.45 | REG | P2 | 5 | 44 | 10.0 | 2 | 3.0 | 16 | 2.7＊ | 1 |
| 2.6M0.45R+1 | REG+1 | P3 | |||||||||
| 2.6M0.45R+2 | REG+2 | P4 | |||||||||
| 3M0.5R | M3 × 0.5 | REG | P2 | 5 | 46 | 11.0 | 3 | 4.0 | 18 | 2.4 | 2 |
| 3M0.5R+1 | REG+1 | P3 | |||||||||
| 3M0.5R+2 | REG+2 | P4 | |||||||||
| 3.5M0.6R | M3.5 × 0.6 | REG | P2 | 5 | 48 | 13.0 | 3 | 4.0 | 18 | 2.8 | 2 |
| 3.5M0.6R+1 | REG+1 | P3 | |||||||||
| 3.5M0.6R+2 | REG+2 | P4 | |||||||||
| 4M0.7R | M4 × 0.7 | REG | P2 | 5 | 52 | 13.0 | 3 | 5.0 | 20 | 3.1 | 2 |
| 4M0.7R+1 | REG+1 | P3 | |||||||||
| 4M0.7R+2 | REG+2 | P4 | |||||||||
| 4M0.5R | M4 × 0.5 | REG | P2 | 5 | 52 | 13.0 | 3 | 5.0 | 20 | 3.1 | 2 |
| 5M0.8R | M5 × 0.8 | REG | P2 | 5 | 60 | 16.0 | 3 | 5.5 | 22 | 4.0 | 2 |
| 5M0.8R+1 | REG+1 | P3 | |||||||||
| 5M0.8R+2 | REG+2 | P4 | |||||||||
| 6M1R | M6 × 1 | REG | P2 | 5 | 62 | 19.0 | 3 | 6.0 | 27 | 4.8 | ２ |
| 6M1R+1 | REG+1 | P3 | |||||||||
| 6M1R+2 | REG+2 | P4 | |||||||||
| 6M0.75R | M6 × 0.75 | REG | P2 | 5 | 62 | 19.0 | 3 | 6.0 | 27 | 4.8 | ２ |
| 6M0.75R+1 | REG+1 | P3 | |||||||||
| 6M0.75R+2 | REG+2 | P4 | |||||||||
| 8M1.25R | M8 × 1.25 | REG | P3 | 5 | 70 | 22.0 | 3 | 6.2 | 34 | 6.0 | ３ |
| 8M1.25R+1 | REG+1 | P4 | |||||||||
| 8M1.25R+2 | REG+2 | P5 | |||||||||
| 8M1R | M8 × 1 | REG | P2 | 5 | 70 | 22.0 | 3 | 6.2 | 34 | 6.0 | ３ |
| 8M1R+1 | REG+1 | P3 | |||||||||
| 8M1R+2 | REG+2 | P4 | |||||||||
| 10M1.5R | M10 × 1.5 | REG | P3 | 5 | 75 | 24.0 | 3 | 7.0 | 39 | 6.8 | ３ |
| 10M1.5R+1 | REG+1 | P4 | |||||||||
| 10M1.5R+2 | REG+2 | P5 | |||||||||
| 10M1.25R | M10 × 1.25 | REG | P3 | 5 | 75 | 24.0 | 3 | 7.0 | 39 | 6.8 | ３ |
| 10M1.25R+1 | REG+1 | P4 | |||||||||
| 10M1.25R+2 | REG+2 | P5 | |||||||||
| 10M1R | M10 × 1 | REG | P3 | 5 | 75 | 24.0 | 3 | 7.0 | 39 | 6.8 | ３ |
| 10M1R+1 | REG+1 | P4 | |||||||||
| 10M1R+2 | REG+2 | P5 | |||||||||
Ordering Guide of NACHI N Point Taps NPO HSSE for Through hole, M12 – M36 LIST6906:
| 記号 Code No. |
呼び Thread Size |
等級 TAP Limit |
食付（P） Lc (P) |
全長 L |
ねじ長 ℓ |
溝数 Flutes |
シャンク径 Ds |
首下長さ Ln |
首径 dn |
形式 Type |
|
| 12M1.75R | M12 × 1.75 | REG | P4 | 5 | 82 | 29.0 | 3 | 8.5 | 43 | 8.3 | 4 |
| 12M1.75R+1 | REG+1 | P5 | |||||||||
| 12M1.75R+2 | REG+2 | P6 | |||||||||
| 12M1.5R | M12 × 1.5 | REG | P3 | 5 | 82 | 29.0 | 3 | 8.5 | 43 | 8.3 | 4 |
| 12M1.5R+1 | REG+1 | P4 | |||||||||
| 12M1.5R+2 | REG+2 | P5 | |||||||||
| 12M1.25R | M12 × 1.25 | REG | P4 | 5 | 82 | 29.0 | 3 | 8.5 | 43 | 8.3 | 4 |
| 12M1.25R+1 | REG+1 | P5 | |||||||||
| 12M1.25R+2 | REG+2 | P6 | |||||||||
| 12M1R | M12 × 1 | REG | P3 | 5 | 82 | 29.0 | 3 | 8.5 | 43 | 8.3 | 4 |
| 12M1R+1 | REG+1 | P4 | |||||||||
| 12M1R+2 | REG+2 | P5 | |||||||||
| 14M2R | M14 × 2 | REG | P4 | 5 | 88 | 30.0 | 3 | 10.5 | 49 | 10.3 | 4 |
| 14M1.5R | M14 × 1.5 | REG | P3 | 5 | 88 | 30.0 | 3 | 10.5 | 49 | 10.3 | 4 |
| 14M1R | M14 × 1 | REG | P3 | 5 | 88 | 30.0 | 3 | 10.5 | 49 | 10.3 | 4 |
| 16M2R | M16 × 2 | REG | P4 | 5 | 95 | 32.0 | 3 | 12.5 | 52 | 12.3 | 4 |
| 16M1.5R | M16 × 1.5 | REG | P3 | 5 | 95 | 32.0 | 3 | 12.5 | 52 | 12.3 | 4 |
| 18M2.5R | M18 × 2.5 | REG | P4 | 5 | 100 | 37.0 | 3 | 14.0 | 56 | 13.8 | 4 |
| 18M1.5R | M18 × 1.5 | REG | P4 | 5 | 100 | 37.0 | 3 | 14.0 | 56 | 13.8 | 4 |
| 18M1R | M18 × 1 | REG | P3 | 5 | 100 | 37.0 | 3 | 14.0 | 56 | 13.8 | 4 |
| 20M2.5R | M20 × 2.5 | REG | P4 | 5 | 105 | 37.0 | 3 | 15.0 | 57 | 14.8 | 4 |
| 20M1.5R | M20 × 1.5 | REG | P4 | 5 | 105 | 37.0 | 3 | 15.0 | 57 | 14.8 | 4 |
| 20M1R | M20 × 1 | REG | P3 | 5 | 105 | 37.0 | 3 | 15.0 | 57 | 14.8 | 4 |
| 22M2.5R | M22 × 2.5 | REG | P4 | 5 | 115 | 38.0 | 3 | 17.0 | 62 | 16.8 | 4 |
| 22M1.5R | M22 × 1.5 | REG | P4 | 5 | 115 | 38.0 | 3 | 17.0 | 62 | 16.8 | 4 |
| 24M3R | M24 × 3 | REG | P4 | 5 | 120 | 45.0 | 3 | 19.0 | 67 | 18.8 | 4 |
| 24M2R | M24 × 2 | REG | P4 | 5 | 120 | 45.0 | 3 | 19.0 | 67 | 18.8 | 4 |
| 24M1.5R | M24 × 1.5 | REG | P4 | 5 | 120 | 45.0 | 3 | 19.0 | 67 | 18.8 | 4 |
| 25M1.5R | M25 × 1.5 | REG | P4 | 5 | 125 | 45.0 | 3 | 19.0 | 67 | 18.8 | 4 |
| 26M1.5R | M26 × 1.5 | REG | P4 | 5 | 125 | 45.0 | 4 | 20.0 | 67 | 19.7 | 4 |
| 27M3R | M27 × 3 | REG | P4 | 5 | 130 | 45.0 | 4 | 20.0 | 67 | 19.7 | 4 |
| 27M1.5R | M27 × 1.5 | REG | P4 | 5 | 130 | 45.0 | 4 | 20.0 | 67 | 19.7 | 4 |
| 30M3.5R | M30 × 3.5 | REG | P5 | 5 | 135 | 48.0 | 4 | 23.0 | 72 | 22.7 | 4 |
| 30M3R | M30 × 3 | REG | P4 | 5 | 135 | 48.0 | 4 | 23.0 | 72 | 22.7 | 4 |
| 30M2R | M30 × 2 | REG | P4 | 5 | 135 | 48.0 | 4 | 23.0 | 72 | 22.7 | 4 |
| 30M1.5R | M30 × 1.5 | REG | P4 | 5 | 135 | 48.0 | 4 | 23.0 | 72 | 22.7 | 4 |
| 30M1R | M30 × 1 | REG | P2 | 5 | 135 | 48.0 | 4 | 23.0 | 72 | 22.7 | 4 |
| 32M1.5R | M32 × 1.5 | REG | P4 | 5 | 145 | 51.0 | 4 | 24.0 | 72 | 23.7 | 4 |
| 33M3.5R | M33 × 3.5 | REG | P5 | 5 | 145 | 51.0 | 4 | 25.0 | 77 | 24.7 | 4 |
| 33M2R | M33 × 2 | REG | P3 | 5 | 145 | 51.0 | 4 | 25.0 | 77 | 24.7 | 4 |
| 33M1.5R | M33 × 1.5 | REG | P4 | 5 | 145 | 51.0 | 4 | 25.0 | 77 | 24.7 | 4 |
| 35M1.5R | M35 × 1.5 | REG | P4 | 5 | 155 | 51.0 | 4 | 26.0 | 77 | 25.7 | 4 |
| 36M4R | M36 × 4 | REG | P5 | 5 | 155 | 57.0 | 4 | 28.0 | 82 | 27.7 | 4 |
| 36M3R | M36 × 3 | REG | P4 | 5 | 155 | 57.0 | 4 | 28.0 | 82 | 27.7 | 4 |
| 36M2R | M36 × 2 | REG | P3 | 5 | 155 | 57.0 | 4 | 28.0 | 82 | 27.7 | 4 |
| 36M1.5R | M36 × 1.5 | REG | P4 | 5 | 155 | 57.0 | 4 | 28.0 | 82 | 27.7 | 4 |
Application Guide of NACHI N Point Taps NPO HSSE for Through hole, M11 – M36 LIST6906:
| 切削速度（m/min） Recommended Cutting Speed | ||||||||||||
| シリーズ Series |
被削材 Work materials |
一般構造用鋼 SS Structural Steel |
低炭素鋼 S15C Low Carbon Steel |
中炭素鋼 S40C Medium Carbon Steel |
高炭素鋼 S50C High Carbon Steel |
合金鋼 SCM, SCr Alloy Steel |
高硬度鋼 Hardened Steel |
ステンレス鋼 SUS Stainless Steel |
鋳鉄 FC Cast Iron |
ダクタイル鋳鉄 FCD Ductile Cast Iron |
アルミニウム合金 AC, ADC Aluminum Alloy |
|
| 商品記号 Code |
～200HB | ～200HB | ～200HB | ～200HB | ～200HB | 20～30HRC | 30～40HRC | |||||
| SG シリーズ SG Series |
SGSP/SGSPL | 15～30 | 15～30 | 10～50 | 10～50 | 15～50 | 8～15 | 5～15 | 5～10 | － | 10～30 | 15～50 |
| SGSP-1.5P | 10～20 | 15～30 | 10～30 | 10～30 | 10～30 | 8～15 | 5～15 | 5～10 | － | 10～30 | 15～50 | |
| SGPO/SGPOL | 15～50 | 15～30 | 15～50 | 10～50 | 15～50 | 10～30 | 8～20 | 5～15 | 15～50 | 15～30 | 15～50 | |
| Hyper Zシリーズ Hyper Z Series |
ZSP/ZSPL | 5～20 | 5～20 | 5～20 | 5～20 | 5～20 | 5～10 | － | － | － | 5～20 | 10～25 |
| ZSP-SUS | 5～10 | 5～10 | 5～10 | 5～10 | － | － | － | 5～10 | － | － | 10～25 | |
| ZPO/ZPOL | 8～20 | 10～25 | 6～25 | 6～25 | 6～25 | 5～10 | － | － | 8～20 | 6～25 | 10～30 | |
| ZPO-SUS | 5～15 | 5～15 | 5～15 | 5～15 | － | － | － | 5～10 | － | － | 10～30 | |
| ST シリーズ ST Series |
STSP | 5～15 | 5～15 | 5～15 | 5～15 | 5～15 | 5～8 | － | － | － | 5～15 | 10～20 |
| STPO | 6～20 | 6～20 | 6～20 | 6～20 | 6～20 | 5～10 | － | － | － | 6～20 | 10～20 | |
| N シリーズ N Series |
NSP/NSPL | 5～10 | 5～15 | 5～10 | 5～10 | 5～10 | 5～8 | － | － | － | － | 10～20 |
| NPO/NPOL | 6～12 | 10～18 | 6～12 | 6～12 | 6～12 | 5～10 | － | － | － | － | 10～20 | |
| HT | 6～12 | 6～12 | 6～12 | 6～10 | 6～12 | 4～8 | － | － | 5～15 | 5～10 | 10～20 | |
| G シリーズ G Series |
GSP/GSPL GSPS | 8～15 | 12～20 | 8～15 | 8～15 | 8～15 | 6～12 | 5～10 | 6～12 | － | － | 15～30 |
| GGN/GGNL | 10～20 | 15～25 | 10～20 | 10～20 | 10～20 | 10～15 | 6～12 | 6～12 | － | 12～20 | 15～30 | |
| GHT/GHTL | 10～18 | 8～18 | 8～18 | 8～18 | 8～18 | 4～8 | 4～8 | － | 10～20 | 10～15 | 12～30 | |
| GOH | 10～25 | 15～25 | 10～25 | 10～25 | 10～20 | 10～15 | 6～15 | － | 15～30 | 10～20 | 15～40 | |
| T シリーズ T Series |
TSP/TSPS | 5～10 | 8～15 | 5～10 | 5～10 | 5～10 | 5～8 | － | 4～8 | － | － | － |
| TGN/TGNS | 6～12 | 10～18 | 6～12 | 6～12 | 6～12 | 5～10 | － | 5～10 | － | － | － | |
| エクセルシリーズ EXCEL Series |
ESP/EHT | － | － | － | － | － | － | － | － | 12～30 | 12～20 | 15～50 |
| タフレットシリーズ TAFLET Series |
TFS/TFL TFLL TFST/TFSTL | 8～15 | 10～20 | 8～15 | 5～10 | 8～15 | 5～10 | － | 5～10 | － | － | 15～30 |
| 推奨切削油剤 Cutting Fluids |
極圧活性型不水溶性 Sulfochlorinated Oil 水溶性 Water soluble Oil |
水溶性 Water soluble Oil |
||||||||||
Tanggal:
