Abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing, which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. In short, the ceramics which are used to cut, grind and polish other softer materials are known as abrasives.
Cutting tool or cutter is used to cut, shape, and remove material from a workpiece by means of machining tools as well as shear deformation. There are several different types of single edge cutting tools that are made from a variety of hardened metal alloys that are vary in size as well as alloy composition depending on the size and the type of material being turned. These cutting tools are held stationary by what is known as a tool post which is what manipulates the tools to cut the material into the desired shape.
Inspections ensure accuracy and standard. Inspection can be a visual inspection or involve sensing technologies such as ultrasonic testing, accomplished with a direct physical presence or remotely such as a remote visual inspection, and manually or automatically such as an automated optical inspection. Non-contact optical measurement and photogrammetry have become common NDT methods for inspection of manufactured components and design optimization.
Machining is a process in which a material (often metal) is cut to a desired final shape and size by a controlled material-removal process. The processes that have this common theme are collectively called subtractive manufacturing, which utilizes machine tools, in contrast to additive manufacturing (3D printing), which uses controlled addition of material.
Material testing is an interdisciplinary field of materials science that covers the discovery of new materials and characteristic, classify particularly solids. The field is also commonly termed materials science and engineering emphasizing engineering aspects of building useful items, and materials physics, which emphasizes the use of physics to describe material properties.
Metrology is defined by the International Bureau of Weights and Measures (BIPM) as "the science of measurement, embracing both experimental and theoretical determinations at any level of uncertainty in any field of science and technology". It establishes a common understanding of units, crucial to human activity. Metrology is a wide reaching field, but can be summarized through three basic activities: the definition of internationally accepted units of measurement, the realisation of these units of measurement in practice, and the application of chains of traceability (linking measurements to reference standards). These concepts apply in different degrees to metrology's three main fields: scientific metrology; applied, technical or industrial metrology, and legal metrology.
Overall maintenance functions can defined as maintenance, repair and overhaul (MRO), and MRO is also used for maintenance, repair and operations. The technical meaning of maintenance involves functional checks, servicing, repairing or replacing of necessary devices, equipment, machinery, building infrastructure, and supporting utilities in industrial, business, and residential installations. Over time, this has come to include multiple wordings that describe various cost-effective practices to keep equipment operational; these activities occur either before or after a failure.
Sawing are commonly used for cutting hard materials. They are used extensively in forestry, construction, demolition, medicine, and hunting. saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power source. An abrasive saw has a powered circular blade designed to cut through metal or ceramic.
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Standarisasi Limit gauge yang saat ini kita kenal, sebenarnya merupakan produk peralihan dari revolusi industri [...]
Force Gauge merupakan perangkat ukur hand tools yang sangat presisi untuk mengukur berbagai objek. Bagi [...]
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
TOKYO – Nachi-Fujikoshi, produsen bearing otomotif besar Jepang, akan memindahkan pabrik produksi bearing serba guna [...]
Makita dikenal sebagai produsen perkakas kerja teknik maupun pertukangan dengan baterai yang awet dan presisi. [...]
Kami merangkum informasi dari setiap prinsipal dan inovator teknik dalam menemukan dan menganalisis masalah dengan keahlian tertentu yang diperlukan. Dengan kata lain, tantangan Anda dalam menghubungkan manusia dengan bidang keahlian yang mungkin membutuhkan solusi terbaru. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Selamat datang di Blog Metalextra — tujuan utama kami yang baru untuk pembaruan berita dan cerita terbaru dari dalam Metalextra dan mitra. Kami berharap Blog Metalextra akan memungkinkan kami membawakan Anda lebih banyak cerita dan memberi tahu mereka dengan lebih banyak cara. Terima kasih telah membaca!
Metalextra pertama kali memulai blogging pada tahun 2019 — saat sebelum pandemi menyerang dengan ketidakpastian. Sejak itu Metalextra telah meningkat, dan kami telah menerbitkan ribuan posting di sejumlah besar topik yang terdiri dari pembaruan Produk, Cerita dan kabar berita perusahaan mitra kami, Berita terkait industri presisi dan banyak lagi.
Kami ingin memudahkan Anda menemukan topik mengenai teknik dan konten bermanfaat yang bisa memperluas cakrawala anda dibindang teknik presisi dan pengembangan diri. Blog Metalextra ini dirancang dalam Bahasa Indonesia untuk tumbuh dan berubah seperti yang kami lakukan, sehingga saat kami memperkenalkan produk dan teknologi baru, agar andapun bisa menemukan dan memandu Anda mencari solusi cerdas industri. Dan semuanya hadir dengan gambar, video, dan tayangan slide yang lebih besar dan indah. Jika Anda ingin berkontribusi pada artikel maupun ingin memilki direct link dan update, silahkan hubungi kami di Sales@Metalextra.com
Info selengkapnya:
NACHI Spiral Tap Hyper Z 43° ZSP LIST6850 merupakan solusi ekonomis mata tapping gagang panjang untuk pengerjaan ulir sekrup fastener dilubang tak tembus (Blind hole). Cocok untuk ulir logam material ferrous hingga 45 HRC maupun material baja umum dengan ukuran M3 – M24. Gagangnya NACHI Spiral Tap Hyper Z 43° ZSP LIST6850 bisa digunakan pada berbagai tipe mesin threading tap berat, fly arm tapping hingga bor portabel tangan.
Mata machine tap NACHI Spiral Tap Hyper Z 43° ZSP LIST6850 ini terbuat dari material HSS dengan campuran Cobalt 5-8%. Mata machine tap NACHI Spiral Tap Hyper Z 43° ZSP LIST6850 ini tanpa coating yang menawarkan peningkatan keausan disuhu tinggi dan ketahanan tepi terhadap chipping dan bekerja 2x lipat lebih baik daripada tipe HSS pada lubang yang sudah dibor.
Sejak 1928, NACHI FUJIKOSHI menawarkan solusi cutting tool dan solusi manufaktur dari kota Kumano – Wakayama Jepang. NACHI FUJIKOSHI Group juga memiliki unit produksi yang besar di Singapura. Pastikan kehandalan dan keaslian NACHI FUJIKOSHI hanya dengan membelinya di METALEXTRA.com.
Fitur NACHI Spiral Tap Hyper Z 43° ZSP HSS-E LIST6850:
Rentang diameter M3 – M24 sesuai dengan ISO METRIK presisi.
Cocok untuk material keras hingga 45 HRC seperti Low-Carbon Steel (carbon alloy <0.25%) / Medium carbon steel (carbon 0.25 – 0.45%) / High Carbon Steel (C >0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Quenched dan tempered steel (25 – 45 HRC) / Ductile Cast Iron (FCD) / Copper (Cu) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC)
Tipe gagang lurus atau Straight Shank dengan taper bisa digunakan untuk aplikasi pada mesin drill press, mesin tapping, CNC maupun magnetic drill bor.
Material inti gagang shank terbuat dari material HSS Cobalt tanpa coating 2 kali kecepatan potong dari mata pisau tapping HSS tanpa lapis, untuk segala keperluan.
Sudut mata pisau berulir dengan kemiringan 43° sehingga konsisten digunakan pada kecepatan tinggi pada logam tipe yang sama berulang-ulang.
Harap dicatat:
Gambar hanya untuk tujuan representasi. Produk mungkin berbeda dari yang ditunjukkan di atas. Diskon% dibulatkan ke Bilangan bulat terdekat. Harga bisa berubah sewaktu-waktu seiring dengan perubahan nilai tukar valuta asing dan program promosi. Untuk lebih jelas silahkan hubungi: Sales@Metalextra.com
Dimension Guide of NACHI Spiral Tap Hyper Z 43° ZSP HSS-E, M3 – M24 LIST6850:
Ordering Guide of NACHI Spiral Tap Hyper Z 43° ZSP HSS-E, M3 – M11 LIST6850:
| 記号 Code No. |
呼び Thread Size |
等級 TAP Limit |
食付（P） Lc (P) |
全長 L |
ねじ長 ℓ |
溝数 Flutes |
シャンク径 Ds |
首下長さ Ln |
首径 dn |
形式 Type |
||||||||||||||||||
| 3M0.5R | M3 × 0.5 | REG | P1 | 2.5 | 46 | 5.6 | 3 | 4.0 | 20.0 | 2.35 | 1 | |||||||||||||||||
| 3M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 3M0.5R+2 | REG+ 2 | P3 | ||||||||||||||||||||||||||
| 3M0.35R | M3 × 0.35 | REG | P1 | 2.5 | 46 | 4.4 | 3 | 4.0 | 20.0 | 2.55 | 1 | |||||||||||||||||
| 3M0.35R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 3.5M0.6R | M3.5 × 0.6 | REG | P1 | 2.5 | 48 | 6.8 | 3 | 4.0 | 20.0 | 2.75 | 1 | |||||||||||||||||
| 3.5M0.6R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 3.5M0.35R | M3.5 × 0.35 | REG | P1 | 2.5 | 48 | 4.4 | 3 | 4.0 | 20.0 | 2.95 | 1 | |||||||||||||||||
| 3.5M0.35R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 4M0.7R | M4 × 0.7 | REG | P2 | 2.5 | 52 | 8.1 | 3 | 5.0 | 23.0 | 3.15 | 1 | |||||||||||||||||
| 4M0.7R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 4M0.7R+2 | REG+ 2 | P4 | ||||||||||||||||||||||||||
| 4M0.5R | M4 × 0.5 | REG | P1 | 2.5 | 52 | 6.1 | 3 | 5.0 | 23.0 | 3.35 | 1 | |||||||||||||||||
| 4M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 4.5M0.75R | M4.5 × 0.75 | REG | P2 | 2.5 | 55 | 8.7 | 3 | 5.0 | 24.0 | 3.55 | 1 | |||||||||||||||||
| 4.5M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 4.5M0.5R | M4.5 × 0.5 | REG | P1 | 2.5 | 55 | 6.1 | 3 | 5.0 | 24.0 | 3.85 | 1 | |||||||||||||||||
| 4.5M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 5M0.8R | M5 × 0.8 | REG | P2 | 2.5 | 60 | 9.4 | 3 | 5.5 | 26.0 | 4.05 | 1 | |||||||||||||||||
| 5M0.8R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 5M0.8R+2 | REG+ 2 | P4 | ||||||||||||||||||||||||||
| 5M0.5R | M5 × 0.5 | REG | P1 | 2.5 | 60 | 6.1 | 3 | 5.5 | 26.0 | 4.35 | 1 | |||||||||||||||||
| 5M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 5.5M0.5R | M5.5 × 0.5 | REG | P1 | 2.5 | 60 | 6.1 | 3 | 5.5 | 27.0 | 4.85 | 1 | |||||||||||||||||
| 5.5M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 6M1R | M6 × 1 | REG | P2 | 2.5 | 62 | 12.0 | 3 | 6.0 | 29.0 | 4.75 | 1 | |||||||||||||||||
| 6M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 6M1R+2 | REG+ 2 | P4 | ||||||||||||||||||||||||||
| 6M0.75R | M6 × 0.75 | REG | P2 | 2.5 | 62 | 9.2 | 3 | 6.0 | 29.0 | 5.05 | 1 | |||||||||||||||||
| 6M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 6M0.5R | M6 × 0.5 | REG | P1 | 2.5 | 62 | 6.1 | 3 | 6.0 | 29.0 | 5.35 | 1 | |||||||||||||||||
| 6M0.5R+1 | REG+1 | P2 | ||||||||||||||||||||||||||
| 7M1R | M7 × 1 | REG | P2 | 2.5 | 65 | 12.0 | 3 | 6.2 | 29.0 | 5.75 | 2 | |||||||||||||||||
| 7M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 7M0.75R | M7 × 0.75 | REG | P2 | 2.5 | 65 | 9.2 | 3 | 6.2 | 29.0 | 6.05 | 2 | |||||||||||||||||
| 7M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 8M1.25R | M8 × 1.25 | REG | P2 | 2.5 | 70 | 15.4 | 3 | 6.2 | 33.0 | 6.55 | 3 | |||||||||||||||||
| 8M1.25R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 8M1.25R+2 | REG+ 2 | P4 | ||||||||||||||||||||||||||
| 8M1R | M8 × 1 | REG | P2 | 2.5 | 70 | 12.4 | 3 | 6.2 | 27.0 | 6.75 | 3 | |||||||||||||||||
| 8M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 8M0.75R | M8 × 0.75 | REG | P2 | 2.5 | 70 | 9.2 | 3 | 6.2 | 24.5 | 7.05 | 3 | |||||||||||||||||
| 8M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 9M1.25R | M9 × 1.25 | REG | P2 | 2.5 | 72 | 15.4 | 3 | 7.0 | 33.0 | 7.55 | 3 | |||||||||||||||||
| 9M1.25R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 9M1R | M9 × 1 | REG | P2 | 2.5 | 72 | 12.4 | 3 | 7.0 | 27.0 | 7.75 | 3 | |||||||||||||||||
| 9M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 9M0.75R | M9 × 0.75 | REG | P2 | 2.5 | 72 | 9.2 | 3 | 7.0 | 24.5 | 8.05 | 3 | |||||||||||||||||
| 9M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 10M1.5R | M10 × 1.5 | REG | P2 | 2.5 | 75 | 18.9 | 3 | 7.0 | 37.0 | 8.25 | 3 | |||||||||||||||||
| 10M1.5R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 10M1.5R+2 | REG+ 2 | P4 | ||||||||||||||||||||||||||
| 10M1.25R | M10 × 1.25 | REG | P2 | 2.5 | 75 | 15.7 | 3 | 7.0 | 33.0 | 8.55 | 3 | |||||||||||||||||
| 10M1.25R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 10M1R | M10 × 1 | REG | P2 | 2.5 | 75 | 12.4 | 3 | 7.0 | 27.0 | 8.75 | 3 | |||||||||||||||||
| 10M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 10M0.75R | M10 × 0.75 | REG | P2 | 2.5 | 75 | 9.2 | 3 | 7.0 | 25.0 | 9.05 | 3 | |||||||||||||||||
| 10M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 11M1.5R | M11 × 1.5 | REG | P2 | 2.5 | 80 | 18.9 | 3 | 8.0 | 37.0 | 9.25 | 3 | |||||||||||||||||
| 11M1.5R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 11M1R | M11 × 1 | REG | P2 | 2.5 | 80 | 12.4 | 3 | 8.0 | 27.0 | 9.75 | 3 | |||||||||||||||||
| 11M1R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 11M0.75R | M11 × 0.75 | REG | P2 | 2.5 | 80 | 9.2 | 3 | 8.0 | 25.0 | 10.05 | 3 | |||||||||||||||||
| 11M0.75R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
Ordering Guide of NACHI Spiral Tap Hyper Z 43° ZSP HSS-E, M12 – M24 LIST6850:
| 記号 Code No. |
呼び Thread Size |
等級 TAP Limit |
食付（P） Lc (P) |
全長 L |
ねじ長 ℓ |
溝数 Flutes |
シャンク径 Ds |
首下長さ Ln |
首径 dn |
形式 Type |
||||||||||||||||||
| 12M1.75R | M12 × 1.75 | REG | P3 | 2.5 | 82 | 22.4 | 3 | 8.5 | 42.0 | 9.95 | 3 | |||||||||||||||||
| 12M1.75R+1 | REG+1 | P4 | ||||||||||||||||||||||||||
| 12M1.75R+2 | REG+ 2 | P5 | ||||||||||||||||||||||||||
| 12M1.5R 12M1.5R+1 |
M12 × 1.5 | REG | P2 | 2.5 | 82 | 20.9 | 3 | 8.5 | 40.0 | 10.25 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 12M1.25R 12M1.25R+1 |
M12 × 1.25 | REG | P2 | 2.5 | 82 | 17.2 | 3 | 8.5 | 35.0 | 10.55 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 12M1R 12M1R+1 |
M12 × 1 | REG | P2 | 2.5 | 82 | 13.5 | 3 | 8.5 | 33.0 | 10.75 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 14M2R | M14 × 2 | REG | P3 | 2.5 | 88 | 25.9 | 3 | 10.5 | 46.0 | 11.65 | 3 | |||||||||||||||||
| 14M2R+1 | REG+1 | P4 | ||||||||||||||||||||||||||
| 14M1.5R | M14 × 1.5 | REG | P2 | 2.5 | 88 | 20.9 | 3 | 10.5 | 40.0 | 12.25 | 3 | |||||||||||||||||
| 14M1.5R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 14M1.25R | M14 × 1.25 | REG | P2 | 2.5 | 88 | 17.2 | 3 | 10.5 | 35.0 | 12.55 | 3 | |||||||||||||||||
| 14M1R | M14 × 1 | REG | P2 | 2.5 | 88 | 13.5 | 3 | 10.5 | 33.0 | 12.75 | 3 | |||||||||||||||||
| 16M2R 16M2R+1 |
M16 × 2 | REG | P3 | 2.5 | 95 | 25.9 | 3 | 12.5 | 49.0 | 13.65 | 3 | |||||||||||||||||
| REG+1 | P4 | |||||||||||||||||||||||||||
| 16M1.5R 16M1.5R+1 |
M16 × 1.5 | REG | P2 | 2.5 | 95 | 20.9 | 3 | 12.5 | 40.0 | 14.25 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 16M1R | M16 × 1 | REG | P2 | 2.5 | 95 | 13.5 | 3 | 12.5 | 33.0 | 14.75 | 3 | |||||||||||||||||
| 18M2.5R | M18 × 2.5 | REG | P3 | 2.5 | 100 | 32.6 | 4 | 14.0 | 55.0 | 15.15 | 3 | |||||||||||||||||
| 18M2.5R+1 | REG+1 | P4 | ||||||||||||||||||||||||||
| 18M2R | M18 × 2 | REG | P3 | 2.5 | 100 | 29.0 | 4 | 14.0 | 49.0 | 15.65 | 3 | |||||||||||||||||
| 18M1.5R | M18 × 1.5 | REG | P2 | 2.5 | 100 | 20.9 | 4 | 14.0 | 40.0 | 16.25 | 3 | |||||||||||||||||
| 18M1.5R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 18M1R | M18 × 1 | REG | P2 | 2.5 | 100 | 13.5 | 4 | 14.0 | 33.0 | 16.75 | 3 | |||||||||||||||||
| 20M2.5R 20M2.5R+1 |
M20 × 2.5 | REG | P3 | 2.5 | 105 | 32.6 | 4 | 15.0 | 55.0 | 17.15 | 3 | |||||||||||||||||
| REG+1 | P4 | |||||||||||||||||||||||||||
| 20M2R | M20 × 2 | REG | P3 | 2.5 | 105 | 29.0 | 4 | 15.0 | 49.0 | 17.65 | 3 | |||||||||||||||||
| 20M1.5R 20M1.5R+1 |
M20 × 1.5 | REG | P2 | 2.5 | 105 | 20.9 | 4 | 15.0 | 40.0 | 18.25 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 20M1R | M20 × 1 | REG | P2 | 2.5 | 105 | 13.5 | 4 | 15.0 | 33.0 | 18.75 | 3 | |||||||||||||||||
| 22M2.5R | M22 × 2.5 | REG | P3 | 2.5 | 115 | 32.6 | 4 | 17.0 | 55.0 | 19.15 | 3 | |||||||||||||||||
| 22M2.5R+1 | REG+1 | P4 | ||||||||||||||||||||||||||
| 22M2R | M22 × 2 | REG | P3 | 2.5 | 115 | 29.0 | 4 | 17.0 | 49.0 | 19.65 | 3 | |||||||||||||||||
| 22M1.5R | M22 × 1.5 | REG | P2 | 2.5 | 115 | 20.9 | 4 | 17.0 | 40.0 | 20.25 | 3 | |||||||||||||||||
| 22M1.5R+1 | REG+1 | P3 | ||||||||||||||||||||||||||
| 22M1R | M22 × 1 | REG | P2 | 2.5 | 115 | 13.5 | 4 | 17.0 | 33.0 | 20.75 | 3 | |||||||||||||||||
| 24M3R 24M3R+1 |
M24 × 3 | REG | P3 | 2.5 | 120 | 38.8 | 4 | 19.0 | 63.0 | 20.65 | 3 | |||||||||||||||||
| REG+1 | P4 | |||||||||||||||||||||||||||
| 24M2R | M24 × 2 | REG | P3 | 2.5 | 120 | 30.8 | 4 | 19.0 | 53.0 | 21.65 | 3 | |||||||||||||||||
| 24M1.5R 24M1.5R+1 |
M24 × 1.5 | REG | P2 | 2.5 | 120 | 22.4 | 4 | 19.0 | 50.0 | 22.25 | 3 | |||||||||||||||||
| REG+1 | P3 | |||||||||||||||||||||||||||
| 24M1R | M24 × 1 | REG | P2 | 2.5 | 120 | 14.7 | 4 | 19.0 | 37.0 | 22.75 | 3 | |||||||||||||||||
Tanggal:
