Filter

Showing 361–390 of 1217 results

Digital Micrometer

INSIZE Gear Tooth Digital Micrometer 3591 (DIN 863-3, Graduation; 0.01mm) Accuracy; ±4µm, Range; ≤Ø25mm – Ø175mm

Rp4.500.000

Weighing Scale

INSIZE Platform Weight 8401 (Digital 6 digits, 5.2cm height with backlight, Rechargeable) Range; 60kg – 300kg

Rp8.000.000

Metrology

INSIZE Cylindrical Anvil Tube Micrometer 3261 (Graduation: 0.01mm, Feed 1mm/turn) Accuracy; ±6μm, Range; ⌀25mm – 50mm

Rp1.500.000

Calipers

INSIZE Vernier Caliper 1236 (Stainless Steel) Accuracy; ±0.07mm, Range; Ø300mm – Ø1000mm

Rp10.000.000

Calipers

INSIZE Vernier Caliper 1233 with Fine Tuning (Stainless Steel) Accuracy; ±0.03mm, Range; Ø130mm – Ø280mm

Rp1.000.000

Bore Gauge

INSIZE Internal Micrometer 3222 (Sping-loaded Extension Rod with Ball Tips Anvil) Range; Ø50mm – Ø1500mm

Rp5.000.000

Calipers

INSIZE Vernier External Caliper 1214 (Stainless Steel) Accuracy; ±0.05mm, Range; Ø300mm – Ø2000mm

Rp20.000.000

Metrology

INSIZE Weight Block Calibration Standard 8911 (OIML RIII-I 2004, Non-Ferrous Steel) Range; 1Mg – 20Kg

Rp3.000.000

Metrology

INSIZE Weight Sets 8910 (OIML RIII-I 2004, Non-Ferrous Steel) Range; 1Mg – 5Kg

Rp45.000.000

Dial Test Indicator

INSIZE Dial Test Indicator 2302 Series (Resolution; 0.01mm) Accuracy; ±35μm, Range; 25mm

Rp700.000

Dial Test Indicator

INSIZE Dial Test Indicator 2318 Series (Resolution; 0.1mm) Accuracy; ±40μm, Range; 10mm – 30mm

Rp1.200.000

Caliper Gage

INSIZE External Dial Caliper Gauge 2332 (Graduation; 0.01mm, KROEPLIN) Range; ≤⌀20mm – ⌀100mm

Rp3.500.000

Force Gauge

INSIZE Force Gauge ISF-1DF Series (USB Data, Rechargeable, Accuracy ±0.3%) Range; 10N – 10000N

Rp10.000.000

Hardness Tester

INSIZE Automatic Rockwell Hardness Tester ISH-MR150 (Dial, Standard; ISO 6508) Range: 98N – 1471N

Rp45.000.000

Depth Gauges

INSIZE Dial Depth Gage 2343-102 (Graduation; 0.01mm, Accuracy ±30µm) Round Base, Pointed Anvil SR0.4, Range; 10mm, Stroke; 10mm

Rp3.500.000

Depth Gauges

INSIZE Dial Depth Gage 2341-101A (Graduation; 0.01mm, Accuracy ±17µm) Flat Base, Pointed Anvil SR0.2 + Ball Tip SR3, Range; 10mm, Stroke; 10mm

Rp3.500.000

Measuring Stand

INSIZE Test Indicator Stand 6842-150 with Locating Anvil (Stem; Ø28mm) Range; 70-140mm, Vertical; 300mm, flatness; ±2.8µm

Dial Micrometer

INSIZE Roll Outside Micrometer 2715 (Graduation: 0.01mm) Range; Ø100mm – Ø2000mm

Rp675.000.000

Depth Gauges

INSIZE Digital Depth Gauge 1540-300 Double Hook (Graduation: 0.01mm) Range; 300mm

Rp6.500.000

Depth Gauges

INSIZE Vernier Depth Gauge 1243-2001 with hook (Graduation 0.02mm) Range; Ø200mm

Rp3.500.000

Block Gauges

INSIZE Wear Block Set 4111 SET (ISO 3650, For Protection of Gage Block) Range; 1mm – 2mm

Rp450.000

Chamfer, Taper, Welding & Special Contour Gauge

INSIZE Taper Slot Gauge 4630 (Stainless Steel Ruler) Range; ⌀0.4mm – ⌀15mm

Rp700.000

Dial Test Indicator

INSIZE Dial Test Indicator 2894-10F METRIC (DIN878, Resolution 0.0005″) Waterproof IP67 Accuracy ±17µm, Range: 10mm

Angle Plate & V Block

INSIZE Angle Plate Set 4003 (Tool Steel ±55 HRC, Accuracy; ±9”) Range; 1/4° – ≤30°

Rp3.800.000

Calipers

INSIZE Digital Caliper 1139-150 Hard Plastic (Non-Magnetic, Non-Conductive) Accuracy; ±100μm, Range ≤⌀150mm

Rp250.000

Hardness Tester

INSIZE Leeb Rebound Hardness Tester HDT-L410 (ASTM A956, DIN 50156, GB/T 17394) Advance Type

Rp21.000.000

Metrology

INSIZE Digital Test Indicator 2113 (No Auto Power Off, Resolution 0.01mm) Accuracy 5 μm, Range; ≤12.7mm – 25.4mm

Rp1.600.000

Metrology

INSIZE Center Marking Ruler 7205, Range: 100mm – 300mm

Rp3.000.000

Block Gauges

INSIZE Groove Standard Block 6254 (ISO 3650, For Linear Comparison of Groove gauge)

Rp4.000.000

Chamfer, Taper, Welding & Special Contour Gauge

INSIZE Internal Chamfer Gauge 2941 (DIN878, Resolution; 0.01mm / 0.0005 Inch) Anvil Inside Angle; 90° – 127°, Accuracy; ±0,02mm, Range; ⌀0.5mm – ⌀40mm

Rp14.000.000