Industrial standards are established technical or performance specifications that are widely used and recognized in a specific industry. Industrial standards can be developed by industry associations, government agencies, or other organizations, and are often adopted by regulatory bodies or governments as mandatory requirements. Industrial standards help to ensure the safety, reliability, and interoperability of products and systems, and can also help to promote competition and innovation within an industry. In some cases, industrial standards are developed to protect the public interest, such as by setting minimum safety standards for consumer products. Here are the conversion table for Industrial Dimension Standard:
| The following table lists various national standards and international standards on length measuring instruments including Japanese Industrial Standards (JIS), ISO International Standards, and other national standards. (The table below is investigated by | QA-E200007 Rev.3.0 Drawn date：2021-10-21 |
||||||||||||||||||||||||||||||
| Nomenclature | Norm | Japan | International | Germany | U.K. | France | U.S.A. | Brazil | China | India | Russia | ||||||||||||||||||||
| JIS** | JMAS** | ISO** | DIN** | VDI** | BS** | NF** | ANSI/ASME** | Federal** | ABNT/NBR** | GB/T, JB/T** | JJG, JJF** | IS** ＊ | GOST** | ||||||||||||||||||
| 1 | Metal rules | JIS B 7516 | 2005 | – | – | – | – | – | – | – | – | BS 4372 | 1968 | – | – | – | – | GGG-R-791H | 1994 | ABNT NBR NM 279 | 2002 | GB/T 9056 | 2004 | JJG 1 | 1999 | – | – | GOST 427 | 1975 | ||
| 2 | Steel tape measures | JIS B 7512 | 2018 | – | – | – | – | – | – | – | – | – | – | – | – | ASME B89.1.7 | 2009 | – | – | ABNT NBR 10123 | 2012 | – | – | JJG 4 | 2015 | – | – | GOST 7502 | 1998 | ||
| 3 | Textile tape measures | JIS B 7522 | 2018 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ABNT NBR 10124 | 2014 | – | – | JJG 5 | 2001 | – | – | – | – | ||
| 4 | Calipers | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | IS 3651-1 | 2014 | – | – | ||
| (graduation:0.1, 0.05mm) | JIS B 7507 | 2016 | – | – | ISO 13385-1 | 2019 | DIN EN ISO 13385-1 | 2020 | VDI/VDE/DGQ 2618-9.1 | 2006 | BS EN ISO 13385-1 | 2019 | NF E11-091 | 2013 | ASME B89.1.14 | 2018 | GGG-C-111C | 1987 | ABNT NBR NM 216 | 2000 | GB/T 21389 | 2008 | JJG 30 | 2012 | IS 3651-1 | 2014 | GOST 166 | 1989 | |||
| (graduation:0.02mm) | IS 3651-2 | 2014 | |||||||||||||||||||||||||||||
| (dial calipers) | – | – | |||||||||||||||||||||||||||||
| (digital caliper) | – | – | – | – | |||||||||||||||||||||||||||
| 5 | Gear tooth vernier calipers | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GGG-C-111C | 1987 | – | – | GB/T 6316 | 2008 | JJF 1072 | 2000 | – | – | TU 2-034-773-2004 | 2004 | ||
| 6 | Height gauges | JIS B 7517 | 2018 | – | – | ISO 13225 | 2012 | DIN EN ISO 13225 | 2012 | VDI/VDE/DGQ 2618-9.3 | 2006 | BS EN ISO 13225 | 2012 | NF EN ISO 13225 | 2012 | – | – | – | – | ABNT NBR NM 260 | 2002 | GB/T 21390 | 2008 | JJG 31 | 2011 | IS 2921 | 2016 | GOST 164 | 1990 | ||
| 7 | Depth gauges | JIS B 7518 | 2018 | – | – | ISO 13385-2 | 2020 | DIN EN ISO 13385-2 | 2020 | VDI/VDE/DGQ 2618-9.2 | 2006 | BS EN ISO 13385-2 | 2020 | NF E11-096 | 2013 | – | – | GGG-C-111C | 1987 | ABNT NBR NM 216 | 2000 | GB/T 21388 | 2008 | JJG 30 | 2012 | – | – | GOST 162 | 1990 | ||
| – | – | JJG 30-2012 | 2012 | ||||||||||||||||||||||||||||
| 8 | Micrometers | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| (external) | DIN 863-1 residual standard DIN EN ISO 3611 |
2017 2011 |
VDI/VDE/DGQ 2618-10.1 | 2001 | BS EN ISO 3611 | 2010 | NF E11-090 | 1993 | ASME B89.1.13 | 2013 | – | – | ABNT NBR NM-ISO 3611 | 1997 | GB/T 1216 | 2018 | JJG 21 | 2008 | IS 2967 | 1983 | GOST 6507 | 1990 | |||||||||
| NF E11-095 | 2013 | – | – | JJF 1088 | 2015 | GOST 4380 | 1993 | ||||||||||||||||||||||||
| (internal) | JIS B 7502 | 2016 | – | – | ISO 3611 | 2010 | DIN 863-4 | 1999 | VDI/VDE/DGQ 2618-10.7 | 2010 | BS 959 | 2008 | NF E11-090 | 1993 | ASME B89.1.13 | 2013 | – | – | – | – | GB/T 8177 | 2004 | JJG 22 | 2014 | IS 2966 | 1964 | GOST 10 | 1988 | |||
| (head) | DIN 863-2 | 1999 | VDI/VDE/DGQ 2618-10.4 | 2008 | BS 1734 | 1951 | – | – | – | – | – | – | – | – | GB/T 22092 | 2018 | – | – | IS 9483 | 1993 | GOST 6507 | 1990 | |||||||||
| (micrometer for span measurements | DIN 863-3 | 1999 | – | – | BS EN ISO 3611 | 2010 | NF E11-098 | 2019 | – | – | – | – | – | – | GB/T 1217 | 2004 | JJG 82 | 2010 | – | – | GOST 4380 | 1993 | |||||||||
| of teeth) | NF E11-099 | 1993 | |||||||||||||||||||||||||||||
| 9 | Depth micrometers | JIS B 7544 | 1994 | – | – | – | – | DIN 863-2 | 1999 | VDI/VDE/DGQ 2618-10.5 | 2010 | BS 6468 | 2008 | NF E11-097 | 1998 | ASME B89.1.13 | 2013 | – | – | – | – | GB/T 1218 | 2018 | JJG 24 | 2016 | – | – | GOST 7470 | 1992 | ||
| NF E11-096 | 2013 | ||||||||||||||||||||||||||||||
| 10 | Indicating micrometers | JIS B 7520 | 1981 | – | – | – | – | DIN 863-3 | 1999 | VDI/VDE/DGQ 2618-10.3 | 2002 | – | – | NF E11-090 | 1993 | – | – | – | – | – | – | GB/T 8061 | 2004 | JJG 26 | 2011 | – | – | GOST 6507 | 1990 | ||
| 11 | Micrometer for wall-thickness measurement | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GB/T 6312 | 2004 | JJG 21 | 2008 | – | – | – | – | ||
| 12 | Internal micrometers with three-point-contact | – | – | – | – | – | – | DIN 863-4 | 1999 | VDI/VDE/DGQ 2618-10.8 | 2002 | – | – | – | – | – | – | – | – | – | – | GB/T 6314 | 2018 | JJF 1411 | 2013 | IS 2966 | 1964 | – | – | ||
| 13 | Screw thread micrometers | – | – | – | – | – | – | DIN 863-3 | 1999 | – | – | – | – | – | – | – | – | – | – | – | – | GB/T 10932 | 2004 | JJG 25 | 2004 | – | – | GOST 4380 | 1993 | ||
| 14 | Stand for micrometers | – | – | JMAS 1001 | 1961 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| 15 | Mechanical dial gauges | JIS B 7503 | 2017 | JMAS 2001 | 1998 | ISO 463 | 2006 | DIN 878 residual standard |
2018 | VDI/VDE/DGQ 2618-11.1 | 2021 | BS 907 | 2008 | NF EN ISO 463 | 2006 | ASME/ANSI B89.1.10M | 2001 | – | – | ABNT NBR ISO 463 | 2013 | GB/T 1219 | 2008 | JJG 34 JJG 379 |
2008 2009 |
IS 2092 | 1983 | GOST 577 | 1968 | ||
| DIN EN ISO 463 | 2006 | GOST 9696 | 1982 | ||||||||||||||||||||||||||||
| GOST 18833 | 1973 | ||||||||||||||||||||||||||||||
| 16 | Electronic Digital indicator gauges | JIS B 7563 | 2021 | – | – | ISO 13102 | 2012 | DIN EN ISO 13102 | 2012 | VDI/VDE/DGQ 2618 -11.4 | 2020 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| 17 | Dial snap gauges | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | JJF 1253 | 2010 | IS 14271 | 1995 | GOST 11098 | 1975 | ||
| 18 | Dial test indicators (lever type) | JIS B 7533 | 2015 | – | – | ISO 9493 | 2010 | DIN 2270 residual standard |
2017 | VDI/VDE/DGQ 2618-11.3 | 2002 | BS 2795 | 1981 | NF E11-053 | 2013 | ASME/ANSI B89.1.10M | 2001 | – | – | – | – | GB/T 8123 | 2007 | JJG 35 | 2006 | IS 11498 | 1985 | GOST 5584 | 1975 | ||
| Dial test indicators (lever type)- Design and metrological characteristics | – | – | DIN EN ISO 9493 | 2011 | |||||||||||||||||||||||||||
| 19 | Cylinder gauges (Bore gauges) | JIS B 7515 | 1982 | JMAS 5009 | 1988 | – | – | – | – | VDI/VDE/DGQ 2618-13.2 | 2005 | – | – | – | – | – | – | – | – | – | – | GB/T 8122 | 2004 | JJF 1102 | 2003 | – | – | GOST 868 | 1982 | ||
| JMAS 5010 | 1988 | GOST 9244 | 1975 | ||||||||||||||||||||||||||||
| – | – | ||||||||||||||||||||||||||||||
| 20 | Microindicators | – | – | – | – | – | – | DIN 879-1 | 1999 | VDI/VDE/DGQ 2618-11.2 | 2002 | – | – | – | – | – | – | – | – | – | – | GB/T 4755 | 2004 | JJG 118 | 2010 | – | – | GOST 18833 | 1973 | ||
| DIN 879-3 | 1999 | GB/T 6320 | 2008 | ||||||||||||||||||||||||||||
| 21 | Gauge blocks | JIS B 7506 | 2004 | JMAS 3002 | 1982 | ISO 3650 | 1998 | DIN EN ISO 3650 | 1999 | VDI/VDE/DGQ 2618-3.1 | 2004 | BS EN ISO 3650 BS 4311-1 | 1999 2007 |
NF EN ISO 3650 | 1999 | ASME B89.1.9 | 2002 | – | – | ABNT NBR NM 215 | 2000 | GB/T 6093 | 2001 | JJG 146 | 2011 | IS 2984 | 2003 | GOST 9038 | 1990 | ||
| GOST 4119 | 1976 | ||||||||||||||||||||||||||||||
| 22 | Plug Gauges Ring Gauges | – | – | JMAS 4008 | 2016 | ISO 1938-1 | 2015 | DIN 2239 DIN EN ISO 1938-1 |
2006 2016 |
VDI/VDE/DGQ 2618-4.1 | 2006 | (Plug) BS 969 |
2008 | NF E11-011 | 2020 | (External) ASME B89.1.5 |
1998 | – | – | ABNT NM 290 | 2004 | – | – | JJG 894 | 1995 | IS 2251 | 1986 | GOST 2015 | 1984 | ||
| GOST 17758 | 1972 | ||||||||||||||||||||||||||||||
| DIN 2250-1 DIN 2250-2 DIN EN ISO 1938-1 |
2008 2008 2016 |
(Ring) BS 4064 BS 4065 |
1966 | (Internal) ASME B89.1.6 | 2002 | ABNT NM 284 | 2003 | GOST 17759 | 1972 | ||||||||||||||||||||||
| GOST 17761 | 1972 | ||||||||||||||||||||||||||||||
| GOST 17763 | 1972 | ||||||||||||||||||||||||||||||
| – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GOST 17765 | 1972 | ||||||||||||||
| 23 | Pin gauges | – | – | JMAS 4009 | 2013 | – | – | DIN 2269 | 1998 | VDI/VDE/DGQ 2618-4.2 | 2007 | – | – | – | – | (External) ASME B89.1.5 | 1998 | – | – | – | – | – | – | – | – | – | – | GOST 2475 | 1988 | ||
| 24 | Height setting micrometers | – | – | JMAS 5015 | 1979 | ISO 7863 | 1984 | – | – | VDI/VDE/DGQ 2618-10.6 | 2010 | – | – | – | – | – | – | – | – | – | – | GB/T 20427 | 2006 | – | – | IS 13907 | 1994 | – | – | ||
| 25 | Standard scales | JIS B 7541 | 2001 | – | – | – | – | DIN 865 | 2006 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | JJG 73 | 2005 | – | – | – | – | ||
| Graduated rules / Rules for manufacturing purposes | – | – | – | – | – | – | DIN 866 | 2006 | – | – | – | – | – | – | – | – | GGG-R-791H | 1994 | ABNT NM 279 | 2002 | – | – | – | – | – | – | – | – | |||
| 26 | Digital position readout | JIS B 7450 | 1989 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | JB/T 10030 | 2017 | JJG 341 | 1994 | – | – | GOST 27537 | 1987 | ||
| 27 | – | – | DIN 32876-1 | 1999 | |||||||||||||||||||||||||||
| Electrical comparators | JIS B 7536 | 1982 | – | – | – | – | DIN 32876-1 Beiblatt 1 |
1999 | VDI/VDE/DGQ 2618-14.1 | 2010 | – | – | – | – | – | – | – | – | – | – | GB/T 26094 | 2010 | JJF 1331 | 2011 | – | – | – | – | |||
| – | – | DIN 32876-2 | 1999 | – | – | ||||||||||||||||||||||||||
| 28 | Flow type air gauges | JIS B 7535 | 1982 | – | – | – | – | DIN 2271 | 2016 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| 29 | Precision surface plates | JIS B 7513 | 1992 | – | – | ISO 8512-1 | 1990 | DIN 876-1 | 1984 | VDI/VDE/DGQ 2618-6.2 | 2014 | BS 817 | 2008 | NF E11-101 | 1992 | ASME B89.3.7 | 2013 | – | – | ABNT NBR NM 104 (Cast iron) |
1998 | GB/T 22095 | 2008 | JJG 117 | 2013 | IS 7327 | 2003 | GOST 10905 | 1986 | ||
| – | – | ISO 8512-2 | 1990 | DIN 876-2 | 1984 | ABNT NBR NM 103 (Granite) |
1998 | GB/T 20428 | 2006 | ||||||||||||||||||||||
| 30 | Optical flats | JIS B 7430 | 1977 | – | – | – | – | DIN 58161-1 | 2002 | VDI/VDE/DGQ 2618-6.1 | 2009 | – | – | – | – | – | – | A-A-58051 | 1995 | ABNT NBR NM 256 | 2002 | JB/T 7401 | 1994 | JJG 28 | 2000 | IS 5440 | 1969 | TU 3-3.2122 | 1988 | ||
| DIN 58161-2 | 2002 | ||||||||||||||||||||||||||||||
| 31 | Optical parallels | JIS B 7431 | 1977 | – | – | – | – | – | – | VDI/VDE/DGQ 2618-6.1 | 2009 | MOY/SCM1/54 NPL | 2001 | – | – | – | – | A-A-58051 | 1995 | ABNT NBR NM 257 | 2002 | GB/T 20428-2 | 2006 | JJG 28 | 2000 | – | – | TU 3-3.2122 | 1988 | ||
| 32 | Measuring microscopes | JIS B 7153 | 1995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | JJG 56 | 2000 | – | – | GOST 8074 | 1982 | ||
| JJG 571 | 2004 | ||||||||||||||||||||||||||||||
| 33 | Profile projectors | JIS B 7184 | 2021 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | JB/T 6830 | 2013 | JJF 1093 | 2015 | – | – | GOST 19795 | 1982 | ||
| 34 | Surface texture: Profile method; | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ASME B46.1 | 2019 | – | – | ABNT NBR ISO 4287 | 2002 | – | – | JJF 1105 | 2018 | IS 15421-1 | 2003 | – | – | ||
| Measurement standards- Part 1: Material measures | JIS B 0659-1 | 2002 | – | – | ISO 5436-1 | 2000 | DIN EN ISO 5436-1 | 2000 | – | – | – | – | NF EN ISO 5436-1 | 2000 | – | – | – | – | GB/T 19067.1 | 2003 | JJF 1099 | 2018 | – | – | GOST 9378 | 1993 | |||||
| Measurement standards- Part 2: Software measurement standards |
– | – | – | – | ISO 5436-2 | 2012 | DIN EN ISO 5436-2 | 2013 | – | – | BS EN ISO 5436-2 | 2012 | NF EN ISO 5436-2 | 2012 | ASME B46.1 | 2019 | – | – | – | – | GB/T 19067.2 | 2004 | – | – | IS 15635-2 | 2014 | – | – | |||
| JIS B 0601 | 2013 | – | – | ISO 4287 | 1997 | DIN EN ISO 4287 | 2010 | – | – | – | – | NF EN ISO 4287 | 1998 | ASME B46.1 | 2019 | – | – | ABNT NBR ISO 4287 | 2002 | GB/T 3505 | 2009 | – | – | IS 15262 | 2002 | GOST R ISO 4287 | 2014 | ||||
| – | – | – | – | ISO 4287 Technical Corrigendum 1 |
1998 | DIN EN ISO 4287/A2 Amendment 2 |
2013 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GOST 25142 | 1982 | ||||
| Terms, definitions and surface texture parameters | – | – | – | – | ISO 4287 Technical Corrigendum 2 |
2005 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GOST 2789 | 1973 | |||
| – | – | – | – | ISO 4287 Amendment 1 |
2009 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
| Definitions and designation of rolling circle waviness | JIS B 0610 | 2001 | – | – | – | – | – | – | – | – | – | – | – | – | ASME B46.1 | 2019 | – | – | – | – | GB/T 16747 | 2009 | – | – | – | – | – | – | |||
| JIS B 0631 | 2000 | – | – | ISO 12085 | 1996 | DIN EN ISO 12085 | 1998 | – | – | – | – | NF EN ISO 12085 | 1998 | ASME B46.1 | 2019 | – | – | – | – | GB/T 18618 | 2009 | – | – | IS 15422 | 2003 | – | – | ||||
| Motif parameters | – | – | – | – | ISO 12085 Corrigendum 1 |
1998 | DIN EN ISO 12085 Corrigendum 1: |
2009 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Linear profile filters: Gaussian filters | JIS B 0634 | 2017 | – | – | ISO 16610-21 | 2011 | DIN EN ISO 16610-21 | 2013 | – | – | – | – | NF EN ISO 16610-21 | 2012 | ASME B46.1 | 2019 | – | – | – | – | GB/T 18777 | 2009 | – | – | – | – | GOST R 8.652 | 2009 | |||
| JIS B 0633 | 2001 | – | – | ISO 4288 | 1996 | DIN EN ISO 4288 | 1998 | – | – | – | – | NF EN ISO 4288 | 1998 | ASME B46.1 | 2019 | – | – | ABNT NBR ISO 4288 | 2008 | GB/T 10610 | 2009 | – | – | IS 15263 | 2002 | – | – | ||||
| Rules and procedures for the assessment of surface texture | – | – | – | – | ISO 4288 Technical Corrigendum 1 |
1998 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Nominal characteristics of contact (stylus) instruments | JIS B 0651 – |
2001 – |
– – |
– – |
ISO 3274 ISO 3274 Technical Corrigendum 1 |
1996 1998 |
DIN EN ISO 3274 – |
1998 – |
– – |
– – |
BS 1134 – |
2010 – |
NF EN ISO 3274 – |
1998 – |
ASME B46.1 – |
2019 – |
– – |
– – |
ABNT NBR ISO 3274 – |
2008 – |
GB/T 6062 – |
2009 – |
– – |
– – |
IS 15261 – |
2002 – |
GOST 19300 – |
1986 – |
|||
| Calibration of contact (stylus) instruments | JIS B 0670 | 2002 | – | – | ISO 12179 | 2000 | DIN EN ISO 12179 | 2000 | – | – | BS 6393 | 1987 | NF EN ISO 3274 | 1998 | ASME B46.1 | 2019 | – | – | ABNT NBR ISO 12179 | 2002 | GB/T 19600 | 2004 | JJF 1105 | 2018 | IS 15759 | 2007 | GOST R 8.651 | 2009 | |||
| – | – | – | – | ISO 12179 Technical Corrigendum 1 |
2003 | DIN EN ISO 12179 Corrigendum |
2009 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
| Surfaces having stratified functional properties- Part 1: Filtering and general measurement conditions | JIS B 0671-1 | 2002 | – | – | ISO 13565-1 | 1996 | DIN EN ISO 13565-1 | 1998 | – | – | – | – | NF EN ISO 13565-1 | 1998 | ASME B46.1 | 2019 | – | – | – | – | GB/T 18778.1 | 2002 | – | – | IS 15421-1 | 2003 | – | – | |||
| – | – | – | – | ISO 13565-1 Technical Corrigendum 1 |
1998 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
| Surfaces having stratified functional properties- Part 2: Height characterization using the linear material ratio curve | JIS B 0671-2 | 2002 | – | – | ISO 13565-2 | 1996 | DIN EN ISO 13565-2 | 1998 | – | – | – | – | NF EN ISO 13565-2 | 1998 | ASME B46.1 | 2019 | – | – | – | – | GB/T18778.2 | 2003 | – | – | IS 15421-2 | 2003 | – | – | |||
| – | – | – | – | ISO 13565-2 Technical Corrigendum 1 |
1998 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
| Surfaces having stratified functional properties- Part 3: Height characterization using the material probability curve | JIS B 0671-3 | 2002 | – | – | ISO 13565-3 | 1998 | DIN EN ISO 13565-3 | 2000 | – | – | – | – | NF EN ISO 13565-3 | 2002 | ASME B46.1 | 2019 | – | – | – | – | GB/T 18778.3 | 2006 | – | – | IS 15421-3 | 2003 | – | – | |||
| Filtration- Part 21: Linear profile filters: Gaussian filters | – | – | – | – | ISO 16610-21 | 2011 | DIN EN ISO 16610-21 | 2013 | – | – | – | – | NF EN ISO 16610-21 | 2012 | – | – | – | – | – | – | GB/Z 26958.31 | 2011 | – | – | – | – | GOST R ISO 16610-21 | 2015 | |||
| Filtration- Part 22: Linear profile filters: Spline filters | – | – | – | – | ISO 16610-22 | 2015 | DIN EN ISO 16610-22 | 2016 | – | – | – | – | NF EN ISO 16610-22 | 2015 | – | – | – | – | – | – | GB/Z 26958.22 | 2011 | – | – | – | – | – | – | |||
| Filtration- Part 28: Profile filters: End effects | – | – | – | – | ISO 16610-28 | 2016 | DIN EN ISO 16610-28 | 2017 | – | – | – | – | NF EN ISO 16610-28 | 2017 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Filtration- Part 31: Robust profile filters: Gaussian regression filters | – | – | – | – | ISO 16610-31 | 2016 | DIN EN ISO 16610-31 | 2017 | – | – | – | – | NF EN ISO 16610-31 | 2016 | – | – | – | – | – | – | GB/Z 26958.31 | 2011 | – | – | – | – | – | – | |||
| Filtration- Part 32: Robust profile filters: Spline filters | – | – | – | – | ISO/TS 16610-32 | 2009 | – | – | – | – | – | – | XP ISO/TS 16610-32 | 2009 | – | – | – | – | – | – | GB/Z 26958.32 | 2011 | – | – | – | – | – | – | |||
| Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2005 | – | – | – | – | ISO 10049 | 2019 | DIN EN 10049 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface Texture Rules and Procedures for the Assessment of Surface Texture | – | – | – | – | – | – | – | – | VDA 2006 | 2003 | – | – | – | – | – | – | – | – | – | – | GB/T 10610 | 2009 | – | – | – | – | – | – | |||
| Engineering Drawings Specification of Surface Texture | – | – | – | – | – | – | – | – | VDA 2005 | 2007 | – | – | – | – | – | – | – | – | ABNT NBR ISO 4287 | 2002 | – | – | – | – | – | – | GOST 2.309 | 1973 | |||
| Surface Texture Definitions and Parameters of the Dominant Waviness | – | – | – | – | – | – | – | – | VDA 2007 | 2007 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface Texture “Robust Gaussian Regression Filter” Definition and Application | – | – | – | – | – | – | – | – | VDA 2008 | 2007 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 2: Terms, definitions and surface texture parameters | – | – | – | – | ISO 25178-2 | 2012 | DIN EN ISO 25178-2 | 2012 | – | – | BS EN ISO 25178-2 | 2012 | NF EN ISO 25178-2 | 2012 | – | – | – | – | – | – | GB/T 33523.2 | 2017 | – | – | – | – | GOST R ISO 25178-2 | 2014 | |||
| Surface texture: Areal- Part 3: Specification operators | – | – | – | – | ISO 25178-3 | 2012 | DIN EN ISO 25178-3 | 2012 | – | – | BS EN ISO 25178-3 | 2012 | NF EN ISO 25178-3 | 2012 | – | – | – | – | – | – | GB/T 33523.2 | 2017 | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 6: Classification of methods for measuring surface texture | – | – | – | – | ISO 25178-6 | 2010 | DIN EN ISO 25178-6 | 2010 | – | – | BS EN ISO 25178-6 | 2010 | NF EN ISO 25178-6 | 2010 | – | – | – | – | – | – | GB/T 33523.6 | 2017 | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 70: Material measures | – | – | – | – | ISO 25178-70 | 2014 | DIN EN ISO 25178-70 | 2014 | – | – | BS EN ISO 25178-70 | 2014 | NF EN ISO 25178-70 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 71: Software measurement standards | – | – | – | – | ISO 25178-71 | 2017 | DIN EN ISO 25178-71 | 2018 | – | – | BS EN ISO 25178-71 | 2017 | NF EN ISO 25178-71 | 2013 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 601: Nominal characteristics of contact (stylus) instruments | – | – | – | – | ISO 25178-601 | 2010 | DIN EN ISO 25178-601 | 2011 | – | – | BS EN ISO 25178-601 | 2010 | NF EN ISO 25178-601 | 2010 | – | – | – | – | – | – | GB/T 33523.601 | 2017 | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments | – | – | – | – | ISO 25178-602 | 2010 | DIN EN ISO 25178-602 | 2011 | – | – | BS EN ISO 25178-602 | 2010 | NF EN ISO 25178-602 | 2010 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Surface texture: Areal- Part 701: Calibration and measurement standards for contact (stylus) instruments | – | – | – | – | ISO 25178-701 | 2010 | DIN EN ISO 25178-701 | 2011 | – | – | BS EN ISO 25178-701 | 2010 | NF EN ISO 25178-701 | 2010 | – | – | – | – | ABNT NBR ISO 12179 | 2002 | GB/T 33523.701 | 2017 | – | – | – | – | – | – | |||
| 35 | Instr.for meas. of surface roughness by interferometric method | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ASME B46.1 | 2019 | – | – | – | – | – | – | – | – | – | – | – | – | ||
| Calibration of standards for form and form measuring instruments | – | – | – | – | – | – | – | – | DAkkS-DKD-R4-4 | 2010 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Calibration of standards for roughness and roughness measuring instruments | – | – | – | – | – | – | – | – | DAkkS-DKD-R 4-2 Blatt 1 und 2 |
2010 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| 36 | Acceptance and reverification tests for coordinate measuring | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ASME | 2008 | – | – | ABNT NBR ISO | 2010 | – | – | – | – | – | – | MI 2569 | 1999 | ||
| machines (CMM) | B89.4.10360.2 | 10360-1 | |||||||||||||||||||||||||||||
| JIS B 7440-1 | 2003 | – | – | ISO 10360-1 | 2000 | DIN EN ISO 10360-1 | 2003 | – | – | BS EN ISO 10360-1 | 2001 | NF EN ISO 10360-1 | 2001 | ASME | 2008 | – | – | ABNT NBR ISO | 2010 | GB/T 16857.1 | 2002 | – | – | IS 15635-1 | 2006 | GOST R ISO | 2017 | ||||
| Part 1: Vocabulary | B89.4.10360.2 | 10360-1 | 10360-1 | ||||||||||||||||||||||||||||
| – | – | – | – | ISO 10360-1 | 2002 | – | – | – | – | – | – | ||||||||||||||||||||
| Corrigendum 1 | |||||||||||||||||||||||||||||||
| Part 2: CMMs used for measuring size | JIS B 7440-2 | 2013 | – | – | ISO 10360-2 | 2009 | DIN EN ISO 10360-2 | 2010 | – | – | BS EN ISO 10360-2 | 2009 | NF EN ISO 10360-2 | 2010 | ASME | 2008 | – | – | ABNT NBR ISO | 2018 | GB/T 16857.2 | 2017 | JJF 1064 | 2010 | IS 15635-2 | 2014 | GOST R ISO | 2017 | |||
| B89.4.10360.2 | 10360-2 | 10360-2 | |||||||||||||||||||||||||||||
| Part 3: CMMs with the axis of a rotary table as the fourth axis | JIS B 7440-3 | 2003 | – | – | ISO 10360-3 | 2000 | DIN EN ISO 10360-3 | 2000 | – | – | BS EN ISO 10360-3 | 2001 | NF EN ISO 10360-3 | 2000 | – | – | – | – | ABNT NBR ISO | 2010 | GB/T 16857.3 | 2009 | JJF 1064 | 2010 | IS 15635-3 | 2006 | GOST R ISO | 2017 | |||
| 10360-3 | 10360-3 | ||||||||||||||||||||||||||||||
| Part 4:CMMs used in scanning measuring mode | JIS B 7440-4 | 2003 | – | – | DIN EN ISO 10360-5 | 2020 | – | – | – | – | – | – | ABNT NBR ISO | 2010 | GB/T 16857.4 | 2003 | JJF 1064 | 2010 | IS 15635-4 | 2006 | GOST R ISO | 2017 | |||||||||
| ISO 10360-5 ISO/TS 17865 |
2020 2016 |
BS EN ISO 10360-5 | 2020 | NF EN ISO 10360-5 | 2020 | 10360-4 | 10360-4 | ||||||||||||||||||||||||
| Part 5: CMMs using multiple-stylus probing systems | JIS B 7440-5 | 2013 | – | – | DIN EN ISO 10360-5 | 2020 | – | – | – | – | – | – | – | – | GB/T 16857.5 | 2017 | – | – | IS 15635-5 | 2019 | GOST R ISO | 2017 | |||||||||
| 10360-5 | |||||||||||||||||||||||||||||||
| Part 6: Estimation of errors in computing Gaussian associated features | JIS B 7440-6 | 2004 | – | – | ISO 10360-6 | 2001 | DIN EN ISO 10360-6 | 2009 | – | – | BS EN ISO 10360-6 | 2001 | NF EN ISO 10360-6 | 2002 | ASME B89.4.10 | 2008 | – | – | – | – | GB/T 16857.6 | 2006 | – | – | IS 15635-6 | 2006 | – | – | |||
| – | – | – | – | ISO 10360-6 Corrigendum 1 |
2007 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||||
| Part 7: CMMs equipped with imaging probing systems | JIS B 7440-7 | 2015 | – | – | ISO 10360-7 | 2011 | DIN EN ISO 10360-7 | 2011 | – | – | BS EN ISO 10360-7 | 2011 | NF EN ISO 10360-7 | 2011 | – | – | – | – | – | – | GB/T 24762 | 2009 | – | – | IS 15635-7 | 2019 | – | – | |||
| Part 8: CMMs with optical distance sensors | JIS B 7440-8 | 2015 | – | – | ISO 10360-8 | 2013 | DIN EN ISO 10360-8 | 2014 | – | – | BS EN ISO 10360-8 | 2013 | NF EN ISO 10360-8 | 2014 | – | – | – | – | – | – | – | – | – | – | IS 15635-8 | 2019 | – | – | |||
| Part 9: CMMs with mutiple sensor | JIS B 7440-9 | 2017 | – | – | ISO 10360-9 | 2013 | DIN EN ISO 10360-9 | 2014 | – | – | BS EN ISO 10360-9 | 2013 | NF EN ISO 10360-9 | 2014 | – | – | – | – | – | – | – | – | – | – | IS 15635-9 | 2019 | – | – | |||
| Part 10: CMMs with Laser tracker | – | – | – | – | ISO 10360-10 | 2016 | DIN EN ISO 10360-10 | 2017 | – | – | BS EN ISO 10360-10 | 2016 | NF EN ISO 10360-10 | 2016 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Part 12: CMMs with articulating arm | JIS B 7440-12 | 2019 | – | – | ISO 10360-12 | 2016 | DIN EN ISO 10360-12 | 2018 | – | – | BS EN ISO 10360-12 | 2016 | NF EN ISO 10360-12 | 2016 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| 37 | Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty | – | – | – | – | ISO/TS 23165 | 2006 | DIN ISO/TS 23165 | 2008 | – | – | DD ISO/TS 23165 | 2006 | XP ISO/TS 23165 | 2006 | ASME B89.4.10360.2 | 2008 | – | – | – | – | GB/T 24635.3 | 2009 | – | – | – | – | – | – | ||
| 38 | Accracy of Coodinete Measuring Machine | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| Code of practice for the application of DIN EN ISO 10360-2 for length measurement | – | – | – | – | – | – | – | – | VDI/VDE 2617-2.1 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | IS 15635-2 | 2014 | – | – | |||
| Form measurement | – | – | – | – | – | – | – | – | VDI/VDE2617-2.2 | 2018 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Acceptance and reverification test for coordinate measuring machines of large dimensions | – | – | – | – | – | – | – | – | VDI/VDE 2617-2.1 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Components of measurement deviation of the machine | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation | – | – | – | – | – | – | – | – | VDI/VDE 2617-4 | 2006 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Interim check with artefacts | – | – | – | – | – | – | – | – | VDI/VDE 2617-5 | 2010 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Interim check with ball plates | – | – | – | – | – | – | – | – | VDI/VDE 2617-5.1 | 2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Coordinate measuring machines with optical probes – Basics | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Code of practice for the application of DIN EN ISO 10360-7 to coordinate measuring machines with optical sensors for lateral structures |
– | – | – | – | – | – | – | – | VDI/VDE 2617-6.1 | 2007 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Code of practice for the application of DIN EN ISO 10360-8 to coordinate measuring machines with optical distance sensors |
– | – | – | – | ISO 10360-8 | 2013 | – | – | VDI/VDE 2617-6.2 | 2021 | – | – | NF EN ISO 10360-8 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| CMM with multiple sensors | – | – | – | – | ISO 10360-9 | 2013 | – | – | VDI/VDE 2617-6.3 | 2008 | – | – | NF EN ISO 10360-9 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| – | – | – | – | – | – | – | – | VDI/VDE 2617-6.3 (planned for discontinuance) |
2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
| Estimation of measurement uncertainty of coordinate measuring machines by means of simulation | – | – | – | – | – | – | – | – | VDI/VDE 2617-7 | 2008 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Testsuitability of measurements with coordinate measuring machines | – | – | – | – | – | – | – | – | VDI/VDE 2617-8 | 2019 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Acceptance and reverification tests for articulating arm CMM | – | – | – | – | ISO 10360-12 | 2016 | – | – | VDI/VDE 2617-9 | 2009 | – | – | NF EN ISO 10360-12 | 2016 | – | – | – | – | – | – | – | – | JJF 1408 | 2013 | – | – | – | – | |||
| Acceptance and reverification tests of laser trackers | – | – | – | – | ISO 10360-10 | 2016 | – | – | VDI/VDE 2617-10 | 2011 | – | – | NF EN ISO 10360-10 | 2016 | – | – | – | – | – | – | – | – | JJF 1242 | 2010 | – | – | – | – | |||
| Laser trackers with multiple probing systems | – | – | – | – | – | – | – | – | VDI/VDE 2617-10.1 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets | – | – | – | – | – | – | – | – | VDI/VDE 2617-11 | 2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Acceptance and reverification tests for tactile CMM measuring microgeometries | – | – | – | – | – | – | – | – | VDI/VDE 2617-12.1 | 2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Acceptance and verification tests for optical CMM measuring microgeometries | – | – | – | – | – | – | – | – | VDI/VDE 2617-11 | 2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Dimensional measurement with computer tomography | – | – | – | – | – | – | – | – | VDI/VDE 2617-13 | 2011 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| 39 | Instruments for the assessment of departure from roundness- Measurement of variations in radius | JIS B 7451 | 1997 | JMAS 5022 | 2013 | ISO 4291 | 1985 | – | – | – | – | BS 6740 | 1987 | – | – | ASME B89.3.1 | 1972 | – | – | – | – | GB/T 7235 | 2004 | – | – | – | – | – | – | ||
| 40 | Form measurement | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GOST R 53442 | 2015 | ||
| Cylindricity- Part 1: Vocabulary and parameters of cylindrical form | – | – | – | – | ISO 12180-1 | 2011 | DIN EN ISO 12180-1 | 2011 | – | – | BS EN ISO 12180-1 | 2011 | NF EN ISO 12180-1 | 2011 | – | – | – | – | – | – | GB/T 24633.1 | 2009 | – | – | IS 16225-1 ISO 12180-1 |
2014 2011 |
– | – | |||
| Cylindricity- Part 2: Specification operators | – | – | – | – | ISO 12180-2 | 2011 | DIN EN ISO 12180-2 | 2011 | – | – | BS EN ISO 12180-2 | 2011 | NF EN ISO 12180-2 | 2011 | – | – | – | – | – | – | GB/T 24633.2 | 2009 | – | – | IS 16225-2 ISO 12180-2 |
2014 2011 |
– | – | |||
| Roundness- Part 1: Vocabulary and parameters of roundness | – | – | – | – | ISO 12181-1 | 2011 | DIN EN ISO 12181-1 | 2011 | – | – | BS EN ISO 12181-1 | 2011 | NF EN ISO 12181-1 | 2011 | – | – | – | – | – | – | GB/T 24632.1 | 2009 | – | – | – | – | GOST 8.481 | 1982 | |||
| Roundness- Part 2: Specification operators | – | – | – | – | ISO 12181-2 | 2011 | DIN EN ISO 12181-2 | 2011 | – | – | BS EN ISO 12181-2 | 2011 | NF EN ISO 12181-2 | 2011 | – | – | – | – | – | – | GB/T 24632.2 | 2009 | – | – | – | – | – | – | |||
| Straightness- Part 1: Vocabulary and parameters of | – | – | – | – | ISO 12780-1 | 2011 | DIN EN ISO 12780-1 | 2014 | – | – | BS EN ISO 12780-1 | 2011 | NF EN ISO 12780-1 | 2011 | – | – | – | – | – | – | GB/T 24631.1 | 2009 | – | – | – | – | GOST 8.420 | 2002 | |||
| Straightness- Part 2: Specification operators | – | – | – | – | ISO 12780-2 | 2011 | DIN EN ISO 12780-2 | 2011 | – | – | BS EN ISO 12780-2 | 2011 | NF EN ISO 12780-2 | 2011 | – | – | – | – | – | – | GB/T 24631.2 | 2009 | – | – | – | – | – | – | |||
| Flatness – Part 1: Vocabulary and parameters of flatness | – | – | – | – | ISO 12781-1 | 2011 | DIN EN ISO 12781-1 | 2011 | – | – | BS EN ISO 12781-1 | 2011 | NF EN ISO 12781-1 | 2011 | – | – | – | – | – | – | GB/T 24630.1 | 2009 | – | – | – | – | GOST 8.420 | 2002 | |||
| Flatness- Part 2: Specification operators | – | – | – | – | ISO 12781-2 | 2011 | DIN EN ISO 12781-2 | 2011 | – | – | BS EN ISO 12781-2 | 2011 | NF EN ISO 12781-2 | 2011 | – | – | – | – | – | – | GB/T 24630.2 | 2009 | – | – | – | – | – | – | |||
| Principles for the measurement of geometrical deviations | – | – | – | – | – | – | – | – | VDI/VDE 2631-1 | 2016 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Determination of the sensitivity of the signal transmission chain | – | – | – | – | – | – | – | – | VDI/VDE 2631-2 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Properties and selection of filters | – | – | – | – | – | – | – | – | VDI/VDE 2631-3 | 2018 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Determination of the radial spindle deviation | – | – | – | – | – | – | – | – | VDI/VDE 2631-4 | 2014 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Determination of the axial spindle deviation | – | – | – | – | – | – | – | – | VDI/VDE 2631-5 | 2015 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Determination of the straightness deviation of the linear guide | – | – | – | – | – | – | – | – | VDI/VDE 2631-6 | 2016 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Stability monitoring of form measuring systems | – | – | – | – | – | – | – | – | VDI/VDE 2631-8 | 2013 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| Examples for measurement and analysis conditions | – | – | – | – | – | – | – | – | VDI/VDE 2631-9 | 2020 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| 41 | Verification of contour (form, direction, position) | – | – | – | – | – | – | – | – | VDI/VDE 2629-1 | 2008 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
| Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces | – | – | – | – | – | – | – | – | VDI/VDE 2629-2 | 2019 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| 42 | How to determine surface texture parameter based on JIS related to surface texture | – | – | JMAS 5021 | 2013 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
