Filter

Showing 211–240 of 1217 results

Bore Gauge

INSIZE Digital Bore Plug Gauge 4653 (2-Point / 4-Point Anvil, Grad; 0.01mm) Accuracy; ±18µm, Range; Ø2mm – Ø300mm

Rp5.500.000

Environmental Gauge

INSIZE Moisture Analyzer Scale 8701 Series (RS232C Output, Resolution; 5mg) Range; ≤120g

Rp28.000.000

Coordinate measuring machine (CMM)

INSIZE Threaded Hole Location Gauge 4676 (For CMM/Caliper Spline shaft) Range; M3 – M12

Calipers

INSIZE Keyway Symmetry Gauge 4865-14 For Shaft & Spline (Resolution; 0.01mm) Accuracy ±0.02mm, Range; ≤Ø14mm-110mm

Rp20.000.000

Flatness Gauge

INSIZE Flatness Measurement 6852-150 Ball Probe Granite Stand (Resolution 0.001mm) Range; 150mm

Rp25.000.000

Block Gauges

INSIZE Checkmaster Block Gauge 6882 Series For Coordinate Measuring Machine (METRIC, Ceramic) Accuracy ±1.3µm, Range; ≤300mm – 1000mm

Rp60.000.000

Profile Projector & Measurement

INSIZE Vision Measuring System ISD-E320 With Stand (CNC Motorised, 300x200x200mm) Zoom Range; 33x-208.6x

Rp799.999.969

Flatness Square & Straightness Gauge

INSIZE Angle Square 90° with Flat base 2282-180 (Aluminum Anodized) Accuracy; ±0.3°, Size; 180mm x 185mm

Rp1.700.000

Metrology

INSIZE Digital Refractometer 5801-A55 (Rechargeable, Brix & Refractive Index) Accuracy; ±0.2%, Range; 1.3330RI – 14200RI

Rp5.000.000

Thickness Gage

INSIZE Dial Thickness Gauge 2870-10 Hard Plastic (Graduation; 0,1mm, Accuracy; ±0.1mm) Range; ≤⌀10mm

Rp1.000.000

Display Unit & Read Out Scale

INSIZE Linear Gauge & Display Unit 7131 (RS232C port, Alarm, Resolution; 0.1μm) IP 50, For linear gauge 1 channel

Rp5.000.000

Chamfer, Taper, Welding & Special Contour Gauge

INSIZE Dial Center Finder Gauge 2849-90 For Pipe & Tubes (V-angle 90°, Resolution; 1°) Accuracy ±1°, Range; 4×90°

Rp4.000.000

Calipers

INSIZE Vernier V-Shape Caliper 1229 For Threaded/Odd Flutes (60°/108° Vee angle, Res; 0.02mm) Range; Ø4mm – Ø200mm

Rp4.000.000

Edge Finder

INSIZE Centering Indicator 2847-3 (3D Tester, Shank; Ø16mm) Accuracy; 0.005mm, Range; ≤Ø160mm

Rp35.000.000

Limit Gauge

INSIZE Check Plug Fine Thread Ring Gauge 4677 METRIC (Standard ISO1502, GO/NOGO Gauge) Range; M3.5 – M120

Limit Gauge

INSIZE Check Thread Plug 4647 METRIC (Standard ISO1502, GO/NOGO Gauge) Range; M2 – M68

Dial Micrometer

INSIZE Lapping Machine 6318 (For outside diameter) Range; for Caliper ≤Ø300mm, for Micrometer ≤Ø100mm

Measuring Stand

INSIZE Micrometer Stand Holder 6302 (For 100mm – 300mm Micrometer) Gap; ⌀20mm

Rp2.000.000

Limit Gauge

INSIZE Taper Ring Gauge Metric 6328-BT (Standard ISO Metric) Accuracy; ±0.007mm, Range; øBT30 – øBT80mm

Limit Gauge

INSIZE Taper Plug Gauge Metric 6329-BT (Standard ISO Metric) Accuracy; ±0.007mm, Range; øBT30 – øBT80mm

Calipers

INSIZE Digital Drum Brake Caliper 1168-300 Series (Data output, Grad; 0.01mm) Accuracy; ±0.07mm, Range; ≤Ø300mm

Rp4.500.000

Calipers

INSIZE Digital Inside Groove Caliper 1128 (DIN862, Grad; 0.01mm) Accuracy; ±0.02mm, Range; ≤Ø200mm

Rp4.000.000

Calipers

INSIZE Digital Caliper 1534 Positioning Surface (DIN862, Grad; 0.01mm) Accuracy; ±0.02mm, Range; ≤Ø200mm

Rp3.500.000

Metrology

INSIZE Digital Thickness Gauge 2878-6B For Elastomer (Resolution; 0.001 mm/0.00005”) Accuracy; ±5µm, Range; 12.7mm

Rp8.000.000

Calipers

GARANT Waterproof Caliper 412845 Complete Set (DIN 862, Res; 0.01mm) IP67, Accuracy; ±20μm, Range; ≤Ø150mm

Rp13.000.000

Anvil Point & Measuring Styli

INSIZE Carbide Three Wire Gauge 7394 (Thread Anvil Pitch For Thread Plug Gauge) Accuracy; ±0.5μm, Range; ⌀0.170mm – ⌀3.200mm

Profile Projector & Measurement

INSIZE Horizontal Profile Projector ISP-A3000E (DRO + RS232C Data Output) Magnify; 10~100x, View field: Ø3mm – Ø30mm

Rp250.000.000

Calipers

INSIZE Waterproof Caliper 1115-150 (DIN 862, Res; 0.01mm) IP67, Accuracy; ±20μm, NO DATA, Range; ≤Ø150mm – Ø300mm

Rp2.000.000

Depth Gauges

INSIZE Digital Depth Caliper 1147 (DIN862, Res; 0.01) Accuracy; ±0.03mm, Range; ≤Ø150mm – Ø700mm

Rp2.000.000

Metrology

INSIZE Internal-External Diameter Comparator 6844-100 (3-point anvil, Grad 0.001mm) Accuracy; 1µm, Range; Ø15mm – Ø100mm