Filter

Showing 301–330 of 703 results

Metrology

INSIZE Weight Sets 8910 (OIML RIII-I 2004, Non-Ferrous Steel) Range; 1Mg – 5Kg

Rp45.000.000

Hardness Tester

INSIZE Automatic Rockwell Hardness Tester ISHR-T100 (Dolphin Nose, standard; BSEN 6508, ISO 6508, ASTM E18) Range; 588 N – 1471 N

Rp150.000.000

Dial Test Indicator

INSIZE Dial Test Indicator 2302 Series (Resolution; 0.01mm) Accuracy; ±35μm, Range; 25mm

Rp700.000

Dial Test Indicator

INSIZE Dial Test Indicator 2318 Series (Resolution; 0.1mm) Accuracy; ±40μm, Range; 10mm – 30mm

Rp1.200.000

Hardness Tester

INSIZE Automatic Rockwell Hardness Tester ISH-MR150 (Dial, Standard; ISO 6508) Range: 98N – 1471N

Rp45.000.000

Depth Gauges

INSIZE Dial Depth Gage 2343-102 (Graduation; 0.01mm, Accuracy ±30µm) Round Base, Pointed Anvil SR0.4, Range; 10mm, Stroke; 10mm

Rp3.500.000

Depth Gauges

INSIZE Dial Depth Gage 2341-101A (Graduation; 0.01mm, Accuracy ±17µm) Flat Base, Pointed Anvil SR0.2 + Ball Tip SR3, Range; 10mm, Stroke; 10mm

Rp3.500.000

Measuring Stand

INSIZE Test Indicator Stand 6842-150 with Locating Anvil (Stem; Ø28mm) Range; 70-140mm, Vertical; 300mm, flatness; ±2.8µm

Dial Micrometer

INSIZE Roll Outside Micrometer 2715 (Graduation: 0.01mm) Range; Ø100mm – Ø2000mm

Rp675.000.000

Block Gauges

INSIZE Wear Block Set 4111 SET (ISO 3650, For Protection of Gage Block) Range; 1mm – 2mm

Rp450.000

Chamfer, Taper, Welding & Special Contour Gauge

INSIZE Taper Slot Gauge 4630 (Stainless Steel Ruler) Range; ⌀0.4mm – ⌀15mm

Rp700.000

Hardness Tester

INSIZE Ultrasonic Hardness Tester ISHU-330 (Bluetooth/USB Cable, Thickness; ≥1mm) Range; 100~940HV, 80~650HB, 20~70HRC, 370~1740MPa.

Rp45.000.000

Durometer

INSIZE Fruit Hardness Tester & Durometer 9643-4 (Graduation; 0.02×105Pa / 0.02kg/cm2) Range; 0.5-4×105Pa (0.5-4kg/cm2)

Rp2.500.000

Hardness Tester

INSIZE Leeb Rebound Hardness Tester HDT-L410 (ASTM A956, DIN 50156, GB/T 17394) Advance Type

Rp21.000.000

Metrology

INSIZE Digital Test Indicator 2113 (No Auto Power Off, Resolution 0.01mm) Accuracy 5 μm, Range; ≤12.7mm – 25.4mm

Rp1.600.000

Block Gauges

INSIZE Groove Standard Block 6254 (ISO 3650, For Linear Comparison of Groove gauge)

Rp4.000.000

Bore Gauge

INSIZE Digital Bore Gauge 2124 (2-Point + 3 points Pistol Grip) Accuracy; ±4µm Range; Ø6mm – 300mm

Edge Finder

INSIZE Non Magnetic Edge Finder 6573 (Mechanical Contact Point Ø10mm), Shank Ø10mm, Accuracy: 5µm

Rp1.500.000

Edge Finder

INSIZE Electronic Edge Finder 6566 (LED + Alarm Indicator, Contact Ball Ø10mm), Shank Ø20mm, Accuracy: 5µm

Rp1.500.000

Edge Finder

INSIZE Electronic Edge Finder 6572 (LED + Alarm Indicator, Contact Ball Ø10mm), Shank Ø32mm, Accuracy: 5µm

Rp1.500.000

Edge Finder

INSIZE Electronic Edge Finder 6571 (LED Indicator, Contact Ball Ø10mm), Shank Ø16mm, Accuracy: 10µm

Rp4.000.000

Dial Test Indicator

INSIZE Dial Test Indicator 2801 Reverse Reading (DIN 878, Resolution; 0.01mm) Accuracy 17µm, Range; 10mm

Rp1.000.000

Calipers

INSIZE Digital Caliper Interchangeable Anvil 1124-300AWL (Wireless Output, Resolution; 0.01mm) Accuracy: ±40μm, Range: ≤Ø300mm

Rp5.000.000

Calipers

INSIZE Digital Caliper Interchangeable Anvil 1124-300A (Cable Output, Resolution; 0.01mm)Accuracy: ±40μm, Range: ≤Ø300mm

Rp4.000.000

Calipers

INSIZE Digital Caliper Interchangeable Anvil 1526-200WL (Wireless Output, Resolution; 0.01mm) Accuracy: ±30μm, Range: ≤Ø200mm

Rp4.000.000

Calipers

INSIZE Digital Caliper Interchangeable Anvil 1526-200 (Cable Output, Resolution; 0.01mm)Accuracy: ±30μm, Range: ≤Ø200mm

Rp3.000.000

Metrology

INSIZE Quick Setting Micrometer 3208 (Resolution 0.01mm, Feed 1mm/turn) Accuracy ±4μm, Range; ⌀25mm – 200mm

Rp1.000.000

Digital Micrometer

INSIZE Digital Micrometer 3102 (Data Cable, Graduation: 0.001mm) Accuracy; ±2µm, Range; ≤Ø25mm – Ø200mm

Rp1.200.000

Metrology

INSIZE Screw Thread Micrometer 3281 (Resolution 0.01mm) Accuracy ±4μm, Range; ⌀25mm – 300mm

Rp1.500.000

Digital Micrometer

INSIZE Spline Anvil Digital Micrometer 3533 (Cable Output, Resolution 0.0002mm) IP 65, Accuracy ±4µm, Range; ⌀25mm – ⌀175mm